***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Replace boot interior light.

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

User avatar
noo$h
Lancer ES/EX
Lancer ES/EX
Posts: 168
Joined: Sat Apr 30, 2011 5:48 pm
Location: Gold Coast

Replace boot interior light.

Postby noo$h » Thu Sep 08, 2011 11:09 am

Hey guys ive been searching for a tute to replace the bootlight with an LED festoon ive bought but dont seem to find any. do you guys have any tips on removing the cover on the light? i tried wiggling it around but didnt want to break it.

or would I be better off wiring in an LED bar?

thanks

User avatar
noo$h
Lancer ES/EX
Lancer ES/EX
Posts: 168
Joined: Sat Apr 30, 2011 5:48 pm
Location: Gold Coast

Postby noo$h » Thu Sep 08, 2011 5:36 pm

oh really? yeah photos would be great if you have time, thanks.

User avatar
scraverX
Lancer MASTER
Lancer MASTER
Posts: 1590
Joined: Fri Oct 30, 2009 8:12 am
Location: Canberra, Australia
Contact:

Postby scraverX » Thu Sep 08, 2011 5:45 pm

My amp is mounted up under the parcel shelf and the factory boot light was in the way.

The store that did the install for me tapped into the factory wiring - much like suggested above - and mounted an LED strip.

It's a cheepy and not very bright - plus it's tucked away behind the amp and not in a great spot - but it does the job at night at least.
"Max" 2009 MY10 RX, Black. CCJ Lifetime Premium Member #0125
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Thu Sep 08, 2011 6:26 pm

It is easier to just wire in LED's into the boot to get more light.

The boot light is in a bad spot and if the boot is more then half full it is hard to see much.

I fitted 2 strips of blue LED's in my boot. Both are on the roof of the boot that can not be seen from the rear of the car with the boot open. I dont like to have the light where it shines in your eyes. 1 in the front and the other in the rear. The blue give a nice light.

User avatar
alextricity
Lancer Newbie
Lancer Newbie
Posts: 65
Joined: Thu Jul 21, 2011 4:12 pm
Location: perth, Australia

Postby alextricity » Fri Sep 09, 2011 1:17 pm

jimy619 wrote:Also if your coming to the cruise id be more then happy to show you. like mentioned above mine are stuck up where the factory light is. cant see it but has a nice bright glow. worked really well. but yeah if you come along ill show you how i did mine. really easy to do :) ill try and remember to take photos tonight for you. i keep forgetting sorry


He is from the gold coast ya idot james hahaha =P

User avatar
craigeth
Lancer VR/GT
Lancer VR/GT
Posts: 249
Joined: Thu May 19, 2011 11:25 am
Location: Cairns, Australia
Contact:

Postby craigeth » Fri Sep 09, 2011 2:32 pm

Has anyone here wired up LEDs in a sportsback boot? Would it it best to just mount them to the side like the current boot light, or somewhere else?
Twenty Three Frames - Photography and Video Production
www.twentythreeframes.com

User avatar
dubdocker
Lancer ES/EX
Lancer ES/EX
Posts: 178
Joined: Fri Jan 14, 2011 9:12 am
Location: Geelong, Victoria

Postby dubdocker » Fri Sep 09, 2011 4:06 pm

There's a how-to with pictures here

http://clubcj.net/viewtopic.php?t=6345
Image

User avatar
noo$h
Lancer ES/EX
Lancer ES/EX
Posts: 168
Joined: Sat Apr 30, 2011 5:48 pm
Location: Gold Coast

Postby noo$h » Sat Sep 10, 2011 8:55 am

thanks heaps guys, i ended up taking the clips off and putting in a 6 smd festoon but il definitely have to look into getting an LED bar for an even distribution of light

User avatar
big_d
Lancer VR/GT
Lancer VR/GT
Posts: 211
Joined: Fri Jun 18, 2010 9:00 am
Location: Wellington, New Zealand
Contact:

Postby big_d » Wed Aug 22, 2012 10:26 am

I'm so going to put in a LED strip.
Great idea guys.

Ryan, did you have to put in any thing into the circuit when you wired in the LED strip to the factory loom? or was it as simple as soldering in the LED strip?

User avatar
Syke
Lancer VR/GT
Lancer VR/GT
Posts: 291
Joined: Mon Jun 11, 2012 10:24 am
Location: Toowoomba, Australia

Postby Syke » Wed Aug 22, 2012 12:08 pm

neons work better but im unsure as to whether the same method of installation can be applied
Syke
One step closer to owning an Evo

Google Is Your Friend! Learn to embrace it...
Check Out My Garage
http://clubcj.net/garage.php?mode=view_vehicle&CID=1054


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 26 guests