***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Cruise Control not working when it's cold?

Servicing, Oil Changes, Fluids & Much More.

Moderators: Moderators, Senior Moderators

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Cruise Control not working when it's cold?

Postby Graham » Fri Jun 18, 2010 6:51 pm

For the last week or so I've been driving to work and noticed cruise control doesn't work in the morning when it's cold.

I've tried
-Turning it off/on
-pressing the lower button to set it
-pressing the upper button to set it
-Turn car off/on

It works on the way home when it's warmer though.. It's never done it before after a year of owning the car so I'm not quite sure what the deal is.. Today I drove it to work and its a 30min drive, even after 30 minutes it didn't work.

I'm stumped :shock:

Anyone know what could be causing it?
I'll see how it goes over the coming week and I'll try it at night when it's cold and see what happens, if all else fails I'll probably have to take it into Mitsu to get it checked under warranty..


Image
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Jun 18, 2010 9:01 pm

Out of curiosity, do you have my LED Tail lamps on your car?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Fri Jun 18, 2010 9:57 pm

Nope, just the standard red ones, the only difference is LED brake/reverse bulbs.

It seems weird that it works during the day though which is what gets me confused
Four wheels move the body, two wheels move the soul.

ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Fri Jun 18, 2010 10:01 pm

Graham, if you have LED Brake light globes, that is the problem ;)

Either remove or fit a load resistor.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Jun 18, 2010 10:01 pm

You should know that cruise control fails when the LED tail lamps' load resistor comes loose. Or if they aren't there at all. One guy had his resistor not very well inserted and intermittently, the cruise control couldn't engaged. He then repositioned them properly and all was well again. And this is the only fault signal (the CC failing). No check engine nor service light either.

Any other LEDs?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Fri Jun 18, 2010 11:08 pm

Parkers for LED's and interior bulbs replaced with LED's that's about it

Hmm it makes sense about brake lights, I did replace them when I had to take my bumper off last week :P

I might try replace them and see how it goes :)

Cheeeeeers
Four wheels move the body, two wheels move the soul.

ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster


Return to “Maintenance”

Who is online

Users browsing this forum: No registered users and 47 guests