Ok everyones sharkfins have been sent via Registered Post. I have held back the 2 QLD ones and will bring up on the 2nd Jan to save a bit of coin.
It cost each person $8.65 I will PM you my bank details for reimursement.
This included a padded bag. The sharkfins are in 3 layers of bubblewrap including the bag, so they should not get damaged.
Cheers.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* Visual Garage Sharkfin Antenna - GB Jun'11 R3
Moderator: Senior Moderators
wouldnt these sharkfins decrease your radio reception? as you are removing your antenna to put them on, so you only have the base of your antenna as your new antenna, then covering it with plastic/fiberglass. giving you worse reception, then with out it on and having a full reception.
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM
- Frazza
- Lancer Ralliart
- Posts: 557
- Joined: Wed Aug 05, 2009 8:50 am
- Location: Berrinba, Brisbane
- Contact:
The unit has an internal antenna the screws into the factory base.
http://www.visualgarage.com/Product_Installation.html
http://www.visualgarage.com/Product_Installation.html
MY10 Golf R | 5 Door | Rising Blue Metallic | DSG | MDI | Black 19" Talladega | Motorsport Seats | Bluetooth | Sunroof | RNS510 + DYNAUDIO 300W
- Tin_Pusher
- Lancer ES/EX
- Posts: 186
- Joined: Wed Sep 23, 2009 8:14 pm
- Location: Woodend, Victoria
A comparison here:
http://matrixowners.com/lofiversion/index.php/t64866.html
If I was fitting one, I'd find a weak station on each of the AM and FM bands, then fit the shark fin (without removing the backing from the 3M tape) and check those stations again to see if reception was worse/better/the same. If its satisfactory, properly fit the shark fin.
Do the comparison test during the day, because at night reception distance on the AM band is different, and is affected by fading and interference.
I expect FM reception would be about the same between the shark fin and stock antenna but reduced on the AM band, where the longer/larger the antenna the better.
If anyone does this comparison with weak AM & FM stations, post your results.
http://matrixowners.com/lofiversion/index.php/t64866.html
If I was fitting one, I'd find a weak station on each of the AM and FM bands, then fit the shark fin (without removing the backing from the 3M tape) and check those stations again to see if reception was worse/better/the same. If its satisfactory, properly fit the shark fin.
Do the comparison test during the day, because at night reception distance on the AM band is different, and is affected by fading and interference.
I expect FM reception would be about the same between the shark fin and stock antenna but reduced on the AM band, where the longer/larger the antenna the better.
If anyone does this comparison with weak AM & FM stations, post your results.
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Everything Tin_Pusher has said makes sense with my Sharkfin.
If you don't listen to AM, you shouldn't have a problem.
Since all fins have been dispatched, I'm closing this thread till the next GB.
If you have not recieved your fin, please PM me.
If you don't listen to AM, you shouldn't have a problem.
Since all fins have been dispatched, I'm closing this thread till the next GB.
If you have not recieved your fin, please PM me.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Background of GB Round 3 - Oct' 10
Reopened by demand.
I don't have to say much. All information already available on these pages.
EOI List
1. luffy4688 A39 SA/VIC
2. Itachi D06 WA
3. Steve_83 X42 VIC
4. rthieu X42 VIC
5. megatron U02 QLD
6. 86MIM X42 QLD
7. napkin01 D06 VIC
8.
Reopened by demand.
I don't have to say much. All information already available on these pages.
EOI List
1. luffy4688 A39 SA/VIC
2. Itachi D06 WA
3. Steve_83 X42 VIC
4. rthieu X42 VIC
5. megatron U02 QLD
6. 86MIM X42 QLD
7. napkin01 D06 VIC
8.
Last edited by ofey on Wed Sep 22, 2010 11:25 am, edited 5 times in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 5 guests