*CLOSED* UR Braces - ClubCJ GBuy Nov'10 R5

[Hecky]

Mmm...sems photo uploading is not wroking for me at this time?

[SIR-VRX]

Mmm...sems photo uploading is not wroking for me at this time?

I fixed it for you Hecky

[Hecky]

Hey Ofey,

I'll take all three bars then. I'm just about to PM you,

[Hecky]

Thanx Sir VRX...

[3mPty]

just wondering if any front strut bar left ofey????

[billyboy]

Yep Hecky, that pic is standard VR/VRX, our boot is a little more shallower where the spare sits + add the foam bits around it.

Will be some mucking round involved, but should get there ok. See how I go & will post up some tips.

[ofey]

One last part now boys!! The + is the cost of shipping from MY->Au

Rear Anti-roll/Sway Bar UR-AR23-136 (3.8KG)= A$240ea + A$56 = A$296->ofey
Front Strut Bar UR-TW2-440 (2.0KG)= A$110ea + A$32 = A$142 -> sickbunny
Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea + A$32 = A$152 - Hecky
Front Lower Bar UR-LA4-442 (1.8KG)= A$120ea + A$32 = A$152 -> kinesis
Rear Lower Bar / Rear member brace UR-RLS4-443P (0.9kg) = A$100 + A$15 = A$115 - Hecky
REAR LOWER BAR "PAIR" (4 Point) UR-RL4-444P (0.8kg)= A$110ea + A$13 = A$113 - Hecky
Rear Lower Bar UR-RL2-447 (1.2KG)= A$100ea + A$20 = A$120 - Lethal_1
Total Value = A$900

which I paid A$1100 total (incl. Shipping) for.

[SIR-VRX]

Ofey and Hecky:

Hecky won't be able to use the "REAR LOWER BAR "PAIR" (4 Point) UR-RL4-444P " as the Ralliart one is different to avoid the rear diff in the RA.

The stock RA bar that goes here is more solid than our ones anyway, as it has a more sophisticated shape where as ours is really weak looking.

[Hecky]

Ofey and Hecky:

Hecky won't be able to use the "REAR LOWER BAR "PAIR" (4 Point) UR-RL4-444P " as the Ralliart one is different to avoid the rear diff in the RA.

Was afraid of this...oh well, better to find out now than when trying to put it on...Thanks Sir-VRX..

Ofey, sorry mate, better not grab this brace...cheers

[SIR-VRX]

Lethal_1 said he wants the bar I EOI'd for him.

I'd like the REAR LOWER BAR "PAIR" (4 Point) UR-RL4-444P.

(Sorry Hecky, I didn't talk you out of it just so I could have it! I really does not fit!)

[Hecky]

mmm......hehehe...only kidding Sir-VRX... Thanks for your help..

If you want to the front lower bar, talk to Kinesis, he might not need his...

[SIR-VRX]

I already have the front lower, rer lower 2 point, rear member and rear strut hehe

[Hecky]

I already have the front lower, rer lower 2 point, rear member and rear strut hehe

Was the rear strut difficult to install? I mean, was there much mucking about with the foam, spare wheel etc?

[SIR-VRX]

On the regular Lancers the rear strut isn't that bad...

But we don't have the foam as standard as our boot well is deeper.

[Hecky]

Yep Hecky, that pic is standard VR/VRX, our boot is a little more shallower where the spare sits + add the foam bits around it.

Will be some mucking round involved, but should get there ok. See how I go & will post up some tips.

Yes please, let me know how you go Billy-Boy. Any installation tips greatly appreciated...