*CLOSED* Whiteline Sway Bars Group Buy

[SIR-VRX]

Ok, so we know we have now got Whiteline Swaybars for our CJs . See this thread.

In negotiation with my local Repco (my Dad and mate work for Repco) we can do a group buy to get a discount for everybody who is interested. We will need a minimum of 5 bars to make it possible, but the more we get it the better the discount.

The part numbers are below:

(Note: The prices you will pay will be cheaper than RRP, but these don't include postage from Brisbane to you (neither does the Whiteline RRP). But postage is not dear domestically.)

-----------------



**********
Order List:

1. SIR-VRX - BMF56XZ + BMR86XZ = $425 PAID
2. [s]Tadz0rz - Please Confirm Choice[/s]
3. tjoz - BMF56XZ = $225
4. hecky - BMF56XZ + BMR85XZ = $450 PAID
5. Mizta B - BMF56XZ + BMR86XZ = $425 PAID
6. SPRKLS - BMF56XZ + BMR86XZ = $425 PAID
7. Lethal_1 - BMF56XZ + BMR85XZ = $450 PAID
8. tryg - BMF56XZ + BMR86XZ = $425 PAID
9. [s]arutha - BMF55Z + BMR84Z = $400[/s]
10. driftnut(( - BMF56XZ + [s]BMR86XZ[/s] = $225
11. scraverX - BMF56Z + BMR86Z = $425 PAID
12. Billyboy - BMF56Z + BMR85Z = $450 PAID
13. Brimstone103 - BMR86Z = $200 PAID
14. zedd82 - BMF56XZ + BMR85XZ = $450 PAID
15. BeHaV3 - BMF56XZ + BMR85XZ = $450 PAID
16. Matzilla - BMF56XZ + BMR86XZ = $425 PAID
17. spareparts - BMF56XZ + BMR85XZ = $450 PAID
18. lzy_eye - BMF56XZ + BMR86XZ = $425 PAID
19. vincentchua - BMF56XZ + BMR85XZ = $450
20. vi93r - BMF56XZ + BMR86XZ = $425 PAID
21. ofey - BMF56XZ = $225 PAID

Please confirm your orders and pay now! PM me after you have checked your order!

Everybody regardless of location (within Australia only) will pay the same amount. This will include shipping to the state Senior Moderator or in the case of only one buyer in a particular state, that person. NSW wil be personally colected by either lzy_eye or MiztaB from the future Coffs Harbour Meet. Or if that fails to go ahead, lzy_eye and myself will meet up there anyway for the hell of it!

That is in accordance with the new group buy procedure. To make it fair on everybody.

We need to get orders and money in ASAP, as I need the money upfront to order, and there is a 3 week wait for the order, according to Whiteline. If there are those that can not do this straight away, let me know and we might be able to work out something for you (I know there are a few who asked for February)

[tadz0rz]

Any idea when this will be finalised? When at least 5 EOI's come in yes?

Might be interested depending on how much money i have left over from paying my excess....

[SIR-VRX]

It probably won't happen until February, due to the stock of Whiteline being so low at the moment.

[PYLee]

yo adrian , ur order seems to be wrong , your ordering two front bars ?

1. SIR-VRX - BMF56Z & BMF56XZ <<<< Rear suppose to be 86

[SIR-VRX]

Damn typos!!

Thanks mate! haha

[tadz0rz]

Put me as an EOI but i will confirm at a later stage....After excess is paid =)

[PYLee]

hehe no worries mate , was just looking at those model numbers to see the difference

[BeHaV3]

in

will this buy include the front castor adjustor ... as in the p-29...and rear thingamie on their website?

edit: & roll centre adjust 4 evo?

[tjoz]

I interested but all depends when in February. I plan on getting rest of my exhaust by end of Jan so all depends how much I have left over. For now, I will go for the front bar.

1x BMF56XZ

[SIR-VRX]

@ BeHaV3: You can get whatever Whiteline parts you wish, just need the part numbers.

@ Tjoz: probably like to have it all done and dusted (including delivered) by the end of February. I'll put you down for a front.

[Hecky]

I am definitely interested in the RA front bar 26mm-Sport-BMF56XZ, and RA rear bar 24mm-Sport-BMR85XZ. However need to find out final pricing and delivery (and possible installation, I know the rear is easy enough to install, but what about the front? Is it the same?)

[tadz0rz]

Excuse my ignorance, but do you need to do a wheel alignment after installing these?

[SIR-VRX]

Final price will depend on numbers. The more people means greater savings

Installation shouldn't be too hard. The front would be a little harder, but still DIY for most people.

[SAM-24A]

Hey Tadz, "NO" Wheel Alignment is not needed at all.
Fitting Sway Bars does not alter or change your Suspension Geometry.
It just Limits Body Roll during spirited cornering, Hense Whitelines Logo "Flatout"

Often Ignorance leads to Knowledge !!!

Cheers: Sam

[Mizta B]

Added myself to the list Adrian
Same two as yourself (Same car - go figure LOL)
BMF56XZ & BMR86XZ
Thanks Chris.