***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Dummy interior button and unplugged cable
Moderators: Moderators, Senior Moderators
Dummy interior button and unplugged cable
Anyone know what the dummy button next to the ASC button do? it has a wire plugged into the dummy button and behind the dummy button there is a large pin plug (24 pin?) and was wondering both could be for
- Attachments
-
- dummy button2.jpg (29.49 KiB) Viewed 25713 times
-
- large plug.jpg (423.98 KiB) Viewed 25713 times
Re: Dummy interior button and unplugged cable
Pretty sure the smaller plug is for remote boot release switch , which you can buy a switch online to plug and play.
Big plug , God knows.
Big plug , God knows.
Re: Dummy interior button and unplugged cable
awood wrote:Pretty sure the smaller plug is for remote boot release switch , which you can buy a switch online to plug and play.
Big plug , God knows.
ahh but i have a like boot lever at the bottom of the seat so why have two?
Re: Dummy interior button and unplugged cable
JaymeF12 wrote:awood wrote:Pretty sure the smaller plug is for remote boot release switch , which you can buy a switch online to plug and play.
Big plug , God knows.
ahh but i have a like boot lever at the bottom of the seat so why have two?
Because , cool.
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Re: Dummy interior button and unplugged cable
I'd do this if you could remove the floor one without leaving a hole in the carpet.
- adamhumphrey
- Lancer VRX/GTS
- Posts: 481
- Joined: Fri Jan 01, 2016 11:31 am
- Location: Rutherford NSW, Australia
Re: Dummy interior button and unplugged cable
I think the plug could be the manual head light adjustment switch.
https://www.aliexpress.com/item/1005001703554229.html?spm=a2g0o.ppclist.product.2.33ba4wW74wW7gO&pdp_npi=2%40dis%21AUD%21AU%20%2445.38%21AU%20%2439.14%21%21%21%21%21%400b15785416610727421818281e12a2%2112000017219806993%21btf&_t=pvid:98d9920c-ab14-4227-84f9-172ac075e80e&afTraceInfo=1005001703554229__pc__pcBridgePPC__xxxxxx__1661072742
https://www.aliexpress.com/item/1005001703554229.html?spm=a2g0o.ppclist.product.2.33ba4wW74wW7gO&pdp_npi=2%40dis%21AUD%21AU%20%2445.38%21AU%20%2439.14%21%21%21%21%21%400b15785416610727421818281e12a2%2112000017219806993%21btf&_t=pvid:98d9920c-ab14-4227-84f9-172ac075e80e&afTraceInfo=1005001703554229__pc__pcBridgePPC__xxxxxx__1661072742
MY11 Evo X MR (2011-Current)
MY20 Asx GSR (2023-Current)
MY11 Peugoet 207 XT HDi (2020-Mar 2023)
MY09 Lancer Sportback VRX (2015-2019) - Sold Nov 2019
Owner Operator: - Adam's Attention to Detail. Mobile Detailing and Automotive Installations.
https://www.facebook.com/AdamsAttentionToDetail/
Re: Dummy interior button and unplugged cable
adamhumphrey wrote:I think the plug could be the manual head light adjustment switch.
https://www.aliexpress.com/item/1005001703554229.html?spm=a2g0o.ppclist.product.2.33ba4wW74wW7gO&pdp_npi=2%40dis%21AUD%21AU%20%2445.38%21AU%20%2439.14%21%21%21%21%21%400b15785416610727421818281e12a2%2112000017219806993%21btf&_t=pvid:98d9920c-ab14-4227-84f9-172ac075e80e&afTraceInfo=1005001703554229__pc__pcBridgePPC__xxxxxx__1661072742
Are the headlight adjustments specific to a certain headlight? HIDs i think?
- adamhumphrey
- Lancer VRX/GTS
- Posts: 481
- Joined: Fri Jan 01, 2016 11:31 am
- Location: Rutherford NSW, Australia
Re: Dummy interior button and unplugged cable
I have HID's in my car and the adjustment is auto. I think it applied to some ralliart models. You also need the levelling motors within the headlights.
MY11 Evo X MR (2011-Current)
MY20 Asx GSR (2023-Current)
MY11 Peugoet 207 XT HDi (2020-Mar 2023)
MY09 Lancer Sportback VRX (2015-2019) - Sold Nov 2019
Owner Operator: - Adam's Attention to Detail. Mobile Detailing and Automotive Installations.
https://www.facebook.com/AdamsAttentionToDetail/
- adamhumphrey
- Lancer VRX/GTS
- Posts: 481
- Joined: Fri Jan 01, 2016 11:31 am
- Location: Rutherford NSW, Australia
Re: Dummy interior button and unplugged cable
http://clubcj.net/viewtopic.php?t=18409&start=30
You also have to have the wiring in the plug at the headlight also. This thread talks about it
You also have to have the wiring in the plug at the headlight also. This thread talks about it
MY11 Evo X MR (2011-Current)
MY20 Asx GSR (2023-Current)
MY11 Peugoet 207 XT HDi (2020-Mar 2023)
MY09 Lancer Sportback VRX (2015-2019) - Sold Nov 2019
Owner Operator: - Adam's Attention to Detail. Mobile Detailing and Automotive Installations.
https://www.facebook.com/AdamsAttentionToDetail/
Re: Dummy interior button and unplugged cable
adamhumphrey wrote:http://clubcj.net/viewtopic.php?t=18409&start=30
You also have to have the wiring in the plug at the headlight also. This thread talks about it
I dont think my headlights have that, i just had a quick look and it doesnt look like there is any extra wiring besides the wires for bulbs. Also behind the front bumper, below the hood latch there was this connector and was wondering what this is for?
- Attachments
-
- FrBuPlug2.jpg (286.39 KiB) Viewed 25589 times
- adamhumphrey
- Lancer VRX/GTS
- Posts: 481
- Joined: Fri Jan 01, 2016 11:31 am
- Location: Rutherford NSW, Australia
Re: Dummy interior button and unplugged cable
Outside temp sensor I think. Unless its the sensor for bonnet open/close
MY11 Evo X MR (2011-Current)
MY20 Asx GSR (2023-Current)
MY11 Peugoet 207 XT HDi (2020-Mar 2023)
MY09 Lancer Sportback VRX (2015-2019) - Sold Nov 2019
Owner Operator: - Adam's Attention to Detail. Mobile Detailing and Automotive Installations.
https://www.facebook.com/AdamsAttentionToDetail/
Re: Dummy interior button and unplugged cable
adamhumphrey wrote:Outside temp sensor I think. Unless its the sensor for bonnet open/close
Would this be for the fog lights actually? because i see the hood latch connector right by the hood release
Who is online
Users browsing this forum: No registered users and 30 guests