***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

New Evo x hood

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
lancer2014
Lancer ES/EX
Lancer ES/EX
Posts: 189
Joined: Tue May 17, 2016 12:35 pm
Location: Puerto Rico

New Evo x hood

Postby lancer2014 » Fri Mar 13, 2020 7:45 am

Image

Image
RRM crank pulley
RA snorkel
Takeda intake
Ecu reflash
Magnaflow cat back 2.5
Tein Flex Z Coilovers
Avid 1- 06 18 x 8.5 x 35et
Hidro Real Carbon

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: New Evo x hood

Postby lancerdarryl » Fri Mar 13, 2020 9:00 am

Nice addition to the car
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: New Evo x hood

Postby bumblebee » Fri Mar 13, 2020 12:54 pm

Nice
That will help reduce the temps under the bonnet for sure

Tywhiteguy
Lancer VR/GT
Lancer VR/GT
Posts: 211
Joined: Mon Jul 01, 2019 6:07 am

Re: New Evo x hood

Postby Tywhiteguy » Sat Mar 14, 2020 6:12 am

Looks great! On the 2.0l n/a with heavy rain would this cause any issues?
2012 ES Sportback USDM Long Beach, CA. RA Snorkel, K&N Drop-In,Custom 2.25 catback with Flowmaster resonator+jdm 4” muffler, Gutted from rear seats back, Pioneer AVH-211EX+12” compact sub :welcome:

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: New Evo x hood

Postby bumblebee » Sat Mar 14, 2020 6:21 am

Zero issues on the NA I have one myself to reduce temperature under the bonnet
Direct swap out
Nothing to fear
And it's a heck of a less weight then the NA bonnet

User avatar
lancer2014
Lancer ES/EX
Lancer ES/EX
Posts: 189
Joined: Tue May 17, 2016 12:35 pm
Location: Puerto Rico

Re: New Evo x hood

Postby lancer2014 » Sat Mar 14, 2020 10:00 am

thanks guys for your comments
RRM crank pulley
RA snorkel
Takeda intake
Ecu reflash
Magnaflow cat back 2.5
Tein Flex Z Coilovers
Avid 1- 06 18 x 8.5 x 35et
Hidro Real Carbon

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: New Evo x hood

Postby Lancer1993 » Sat Mar 14, 2020 3:49 pm

What sort of cost for the bonnet ready to use, assuming its the right colour?
Image
My rides CJ VRX - CC coupe

fearfulmaster2
Lancer Newbie
Lancer Newbie
Posts: 42
Joined: Mon Aug 06, 2018 9:40 am

Re: New Evo x hood

Postby fearfulmaster2 » Sat Mar 14, 2020 4:13 pm

Tywhiteguy wrote:Looks great! On the 2.0l n/a with heavy rain would this cause any issues?


I used to remove the slat in the vent to improve air flow but have put it back in. Sometimes I hear somthing slipping on engine start after parking in the rain. I assume the because the drive belt is wet. The driver side vent is on top of the alternator. I am not sure whether the alternator like getting wet. The battery side is fine as there is a battery cover.

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: New Evo x hood

Postby bumblebee » Sat Mar 14, 2020 4:28 pm

Between $1000 $1300 for the bonnet off a wrecker

Put aside $50 a fortnight
You can have one in a year

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: New Evo x hood

Postby Lancer1993 » Sat Mar 14, 2020 5:52 pm

Not cheap, guess many at wreckers are damage as the majority of crashes involve fount end crashes.
Image
My rides CJ VRX - CC coupe

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: New Evo x hood

Postby bumblebee » Sat Mar 14, 2020 6:18 pm

Have a chat to Jimmy at evolution racing spares, he can freight it up
In the grand scheme of things it isn't that expensive.

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: New Evo x hood

Postby Lancer1993 » Sat Mar 14, 2020 8:42 pm

I was wondering what to do with my $750 :)
Image
My rides CJ VRX - CC coupe

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: New Evo x hood

Postby bumblebee » Sun Mar 15, 2020 12:16 pm

Get a Tactrix open port so you can hack the ecu and retune it

https://www.tiperformance.com.au/produc ... -ecuflash/

Probably the cheapest genuine unit in the country

And if you want to get really serious get a AEM 30-4110 wideband unit and you can go nuts with tuning it

User avatar
Nat
Lancer Newbie
Lancer Newbie
Posts: 25
Joined: Mon Jan 21, 2019 7:26 pm
Location: QLD

Re: New Evo x hood

Postby Nat » Mon Mar 16, 2020 8:34 am

Hey Lancer2014, that's a good looking front lip. Do you remember the name/where you sourced it by chance? I would like to freshen up my 08's front but I can't seem to find that is conservative like that one in AU.
Cheers.

User avatar
lancer2014
Lancer ES/EX
Lancer ES/EX
Posts: 189
Joined: Tue May 17, 2016 12:35 pm
Location: Puerto Rico

Re: New Evo x hood

Postby lancer2014 » Mon Mar 16, 2020 9:46 am

Lancer1993 wrote:What sort of cost for the bonnet ready to use, assuming its the right colour?



the cost is $ 630.00 with taxes plus $ 270.00 in paint
RRM crank pulley
RA snorkel
Takeda intake
Ecu reflash
Magnaflow cat back 2.5
Tein Flex Z Coilovers
Avid 1- 06 18 x 8.5 x 35et
Hidro Real Carbon


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 33 guests