Would it necessarily be a dumb idea to put black 50/70mm fender flares on my lancer (in profile picture) without having any kind of body kit on it?
It’s not lowered yet but eventually it will have a 30mm drop, might put 15mm spacers and canter the back wheels -1.5 or something like that, idk if I should be too keen on putting a body kit on it though
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Fender flares
Moderators: Moderators, Senior Moderators
- lancerdarryl
- Lancer MASTER
- Posts: 1929
- Joined: Wed Jul 14, 2010 3:10 am
- Location: Newcastle NSW Australia
Re: Fender flares
Just a comment on wheel spacers......don't use them they will cause bearing failure and you will have a hard time keeping the wheels on it because the wheel nuts tend to keep coming loose.A much better fix is to get the offset you need by purchasing a set of wheels with the desired offset.As for the flares that one is up to you.Running that amount of neg camber will wear out tyres extremely fast, 1/2 deg is more than enough front or rear.
PS wheel spacers are illegal and you can be defected for using them
PS wheel spacers are illegal and you can be defected for using them
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"
"Don't back off until you hit something"
Re: Fender flares
lancerdarryl wrote:Just a comment on wheel spacers......don't use them they will cause bearing failure and you will have a hard time keeping the wheels on it because the wheel nuts tend to keep coming loose.A much better fix is to get the offset you need by purchasing a set of wheels with the desired offset.As for the flares that one is up to you.Running that amount of neg camber will wear out tyres extremely fast, 1/2 deg is more than enough front or rear.
PS wheel spacers are illegal and you can be defected for using them
Absolutely spot on and I am 110% behind you on this
Well said
4G69 TB viewtopic.php?f=49&t=22125
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
Re: Fender flares
lancerdarryl wrote:Just a comment on wheel spacers......don't use them they will cause bearing failure and you will have a hard time keeping the wheels on it because the wheel nuts tend to keep coming loose.A much better fix is to get the offset you need by purchasing a set of wheels with the desired offset.As for the flares that one is up to you.Running that amount of neg camber will wear out tyres extremely fast, 1/2 deg is more than enough front or rear.
PS wheel spacers are illegal and you can be defected for using them
Oh wow okay, thanks for the warning on all of those points, all the stuff I’ve been looking into and can find have mostly been overseas and I should probably start doing more research about local regulations.
Tbh I’m unsure on the offset of my rims atm but the camber on the wheels would still be cool. Is the 1/2 degree a noticeable difference at all?
-
- Lancer Newbie
- Posts: 32
- Joined: Wed Jul 17, 2019 9:34 am
Re: Fender flares
I can second that. I've got an r33 gtr running spacers on the rear and I had the rear passenger side wheel nearly come off 3 times before taking it off the road.
Re: Fender flares
I'd hate to see the damage done when a wheel comes off at speed in a suburban area and hits a child.
Sadly people just don't think about that and they should
Sadly people just don't think about that and they should
4G69 TB viewtopic.php?f=49&t=22125
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
Who is online
Users browsing this forum: No registered users and 31 guests