Came across these if anyone is after some rear lip extensions. They are universal but they're a pretty good fit for the N/A rear bar (and cheap!). Not compatible with factory rear mudflaps.
https://www.aliexpress.com/item/2pcs-Un ... 4c4d7FluXB
You'll need the 52cm length option in Black or "Carbon Fibre" (use the 'colour' selection). Your colour choice might not matter though, I ordered black and got CF
This is with them mounted as far out as they'll go. There is a gap toward the back where the flat mounting surface ends.
I mounted mine so they didn't stick out as far. No gap at the back.
The extensions come with self tapping screws, but I used two screws with captive spring nuts/clip nuts, and two push clips per side that I had laying around. Heaps of room under the rear bar to mark out and drill. You can use the existing mudflap mounting hole, will need to drill 3 other holes each side.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
N/A Rear Bumper Extensions
Moderators: Moderators, Senior Moderators
- ReeceCozaa
- Lancer Legend
- Posts: 1106
- Joined: Thu Mar 16, 2017 8:01 pm
- Location: Sydney
Re: N/A Rear Bumper Extensions
Not bad! Looks real nice bro, a unique add on for a lancer too!
We are all in it for the fun!
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Re: N/A Rear Bumper Extensions
It is different, not my style but different.
- ReeceCozaa
- Lancer Legend
- Posts: 1106
- Joined: Thu Mar 16, 2017 8:01 pm
- Location: Sydney
Re: N/A Rear Bumper Extensions
Cracked out the spray gun and gave these a paint over the weekend. Bit less attention seeking than the CF print!
Rubbed them back with 600 grit paper until they were dull
Wiped clean with wax & grease remover
Applied a coat of flexible plastic primer
Applied a few coats of colour matched acrylic
Applied a few coats of acrylic clear
Rubbed them back with 600 grit paper until they were dull
Wiped clean with wax & grease remover
Applied a coat of flexible plastic primer
Applied a few coats of colour matched acrylic
Applied a few coats of acrylic clear
Who is online
Users browsing this forum: No registered users and 8 guests