So just wondering what out people are putting in there wind screen to keep out the heat in summer, yes its now getting cooler but its a good time to look in to something for next summer and for those of us in warmer parts it still can get hot here during the day.
My Cars screen is only about a year old but it already starting to break up.
Got mine on eBay but found it a little small at 140 x 70 cm.
Please post photos and links wo where you got yours.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Sun Shade
Moderators: Moderators, Senior Moderators
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Re: Sun Shade
Note some cars have a tinted section across the top of the wind screen, perhaps tint in similar location on yours will help a little.
Screen breaking up?
Screen breaking up?
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Sun Shade
i got one that was a little bigger than i needed. this allows me to prop it up using the driver and passenger visors and the rear vision mirror. less chance of it falling down
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Re: Sun Shade
Yeah I do the same with this one, even though it came with suction caps to hold it in place the never really worked well in the heat.
I used to only use exterior ones which I still think are better most of the time because the stop the light and much of the heat entering the car in the first place. Only down sides are rain and high winds.
I used to only use exterior ones which I still think are better most of the time because the stop the light and much of the heat entering the car in the first place. Only down sides are rain and high winds.
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Sun Shade
Yeah, even with the sun shade i have to put a jumper or cloth over gear shifter and steering wheel... why i chose an aluminium gear knob i dont know hahaha
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Re: Sun Shade
My knob (not alloy) and wheel never get that hot when I have the shade up, if it is you really need to change where you're parking in the summer, doesn't do the car interior or paint much good in the long term.
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Sun Shade
Yeah, at school its an open gravel section with no shade, and at home im outside... noticed my clear coat coming off near the wing mirrors, looks like my mod money is going towards painting lol
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Re: Sun Shade
If I needed a major respray I'd but so tempted to change the color.
- VRX_08
- Genius
- Posts: 8017
- Joined: Sun May 29, 2011 9:35 pm
- Location: Northern Adelaide, South Australia
Re: Sun Shade
I had to buy a sunshade for 4wd / vans! The normal sized ones fall down and too short for CJs! I use the sun visors and centre mirror to hold it up, no need then for suction caps! It is a little to large across but it helps keeps the heat off the gear knob and the worst the leather seats! Tinting all your other windows helps a lot too!
The thing that i find the best is thinking about how you park your car! Park it so the rear gets the afternoon sun, it keeps the front seats, steering wheel and gear knob cooler so you don't burn yourself in summer time! All this can make a huge difference i found
The thing that i find the best is thinking about how you park your car! Park it so the rear gets the afternoon sun, it keeps the front seats, steering wheel and gear knob cooler so you don't burn yourself in summer time! All this can make a huge difference i found
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Re: Sun Shade
If I have to park in the sun all day I try finding a place I know will be shaded in the afternoon, so at least the car is cooler when I need to get into it.
Anyone been able to find one with Lancer or the Mitsy logo on the front. My current on it from 'Cars' but looking for something more grownup, maybe a Star Wars one
Anyone been able to find one with Lancer or the Mitsy logo on the front. My current on it from 'Cars' but looking for something more grownup, maybe a Star Wars one
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Sun Shade
Could always investigate getting a blank one and doing the logo yourself?
would imagine some vinyl with some sort of sun protective coat over the top would work wont it?
would imagine some vinyl with some sort of sun protective coat over the top would work wont it?
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
Who is online
Users browsing this forum: No registered users and 46 guests