***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Cancelled group buy interest

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Wed Dec 23, 2015 2:31 pm

Yes a front lip that goes between the pods on the VRX would be good!
Image
My rides CJ VRX - CC coupe

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Wed Dec 23, 2015 5:21 pm

aspir3 wrote:Any chance we as a club could buy CVT and SST oil in 220 litre drums and then sell to members per litre. This would give a savings plus members would only need to purchase the required amount needed. At the moment I need to buy 2 x 5 litre containers to service my CVT when it only takes 7 litres. Not sure what Im supposed to do with the extra 3 litres. I probably wont need to service my CVT for another 5 years.


I've been doing some research and the cvt oil is sold in 4litre containers. I assumed they were 5 litre containers like engine oil. So purchasing 2 containers means I will only have about 300 ml left over which isn't to bad.

Kalum any idea how much report sell the cvt service kit for?

WadesVRX
Lancer Newbie
Lancer Newbie
Posts: 68
Joined: Sun Oct 30, 2011 12:59 pm
Location: Brisbane

Postby WadesVRX » Fri Dec 25, 2015 2:04 am

My MY14 CJ Lancer VRX mod plan this year is
- Ralliart rear deffuser
- Dual Xforce exhurst system
- RRM or Supercircut Headers

my lancer has a merlin flashd tune and installed a tog hi flow airfilter Ralliart snorkel. Cut out a hole to allow more cold air also intstalled a Intake airduct cover with cooling airduct plate. Personalised plates QLD 1.VRX.1
So I'm slowly modding my CJ.

Happy modding CJ Members


[img]Image%20Location[/img]
Flight Instructor

User avatar
bunnishiwa
Lancer Legend
Lancer Legend
Posts: 1284
Joined: Thu Dec 24, 2009 4:22 pm
Location: Rye, Melbourne

Postby bunnishiwa » Fri Dec 25, 2015 9:21 am

Another idea, given the vast range of wants by us, would be to negotiate a reduced price 'gift card' with an organisation such as carmodsaustralia.com.au or even supercheap or autobahn (not suggestions, just the first that came to mind).

This would allow a larger pool of members to buy in and get what they want.

% discount could be greater for premium members than non premium, meaning all can buy in but a greater benefit is had by paying members
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot :)
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar



Noli Timere Messorem

Lancerman
Lancer Newbie
Lancer Newbie
Posts: 53
Joined: Sat Nov 28, 2015 9:35 pm
Location: NSW AUSTRALIA

Postby Lancerman » Sat Dec 26, 2015 8:45 pm

....

I've just bought a MY15 GSR Sportback and wouldn't mind some lowered springs to bring it back from its current SUV looking kerb height so a group buy for lowered and I'm in.

Wouldn't mind some decent headlights, factory ones are ordinary, someone mention Mars Had some nice ones out now with led running lights.

My cars bum don't look so good especially with that huge boxlike single muffler, can you wack on a decent looking/sounding twin muffler on these GSR Sportbacks?

Is there a rear lip for the GSR'S?

I'm interested in any of the above.

Sorry for my CJ dumbspeak, I'm new to these cars, my speciality is '50s/'60's/'70's cars, go easy on me.

..........

benwallaby10
Lancer Learner
Lancer Learner
Posts: 12
Joined: Mon Dec 14, 2015 8:21 pm
Location: Sydney Australia

Postby benwallaby10 » Mon Dec 28, 2015 5:40 pm

Group Buy for these off Mars ASAP would be great, They reopen on January 18th and I'm after some with the HID kit ASAP

http://www.ebay.com.au/itm/JDM-Varis-CC ... SwgQ9Vrw~k

User avatar
Viking
Lancer VR/GT
Lancer VR/GT
Posts: 230
Joined: Thu Mar 05, 2015 11:32 am
Location: South-East Melbourne

Postby Viking » Sat Jan 02, 2016 8:13 pm

+1 for the Mars lights. They look good.
+1 for an upgraded brake kit (disks, pads, maybe even calipers, if I can stretch to it), too.

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sat Jan 02, 2016 8:43 pm

Do we have any idea what and when the first group buy will be?

User avatar
bg60
Lancer Learner
Lancer Learner
Posts: 16
Joined: Wed Jan 30, 2013 12:16 pm
Location: Adelaide

Postby bg60 » Sun Jan 03, 2016 7:23 pm

Viking wrote:+1 for the Mars lights. They look good. +1 for an upgraded brake kit (disks, pads, maybe even calipers, if I can stretch to it), too.


I also second this option, headlights and brake caliper/disk upgrades

User avatar
MitchArbee
Lancer Learner
Lancer Learner
Posts: 4
Joined: Sat Aug 01, 2015 11:23 pm
Location: North Parramatta, Australia

Postby MitchArbee » Wed Jan 06, 2016 8:36 pm

Definitely Sway Bars.
My ride: [bold] 2015 ES Sport [/bold]

himynameisdaniel
Lancer Evolution
Lancer Evolution
Posts: 824
Joined: Mon Feb 14, 2011 3:58 pm
Location: Adelaide

Postby himynameisdaniel » Wed Jan 06, 2016 10:12 pm

They have re-designed the rear suspension in i believe 2013 onwards
basically removed the rear sway bar and made it extremely difficult for the average user to fit. This could reduce GB numbers.

The best options for improving suspension (and in my view the biggest notice in improvement) is still the following.

Front Strut Brace.
Heavy duty rear sway bar.
decent adjustable coil overs.
K+N drop in
RA intake
SS 4-2-1 Headers
Whiteline Strut Brace
Whiteline Rear Sway Bar
SuperPro Polyurethane Bushings
Paddle Shifters

Merlinised

Davidb0312
Lancer Learner
Lancer Learner
Posts: 8
Joined: Sat Jan 09, 2016 10:46 pm
Location: Penrith

Postby Davidb0312 » Tue Jan 12, 2016 10:57 pm

definitely keen on a deal for some headlights!

User avatar
gange
Lancer Newbie
Lancer Newbie
Posts: 63
Joined: Fri Apr 04, 2014 10:33 pm
Location: Melbourne, Australia

Postby gange » Wed Jan 13, 2016 5:05 pm

I missed out on the last group buy for this under panel.

http://www.dsgperformance.com/SSP-Alumi ... volution-X

I think the cost of freight was the same for 1 or 5 .

Does anyone remember this buy :?:

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Wed Jan 13, 2016 6:24 pm

@ Glenn aka gange

I don't mean to spoil your request, but I don't really think many members would be interested in this item, and moreso when considering that the Aussie Dollar is hemorrhaging atm below $0.70 *doh*
Also since this item is large, heavy @ 14lbs / 6.35kg (guard only without packaging) & in the US, Shipping to Australia is going to be expensive.

On the Positive side, I know that Alan aka Megatron from AK Racing in QLD has a Sump Guard /Engine Under Cover item for under/approx $400 that should interest you.

Image

Image

Image


PM Alan aka Megatron for details & price.
Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L

User avatar
gange
Lancer Newbie
Lancer Newbie
Posts: 63
Joined: Fri Apr 04, 2014 10:33 pm
Location: Melbourne, Australia

Postby gange » Thu Jan 14, 2016 4:59 pm

Thanks Sam :D


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 37 guests