* Mitsubishi OEM Parts for ClubCJ Members *

[gange]

How hard is it to remove the center console? Im considering some carbon wrap for the bit around the manual gear leaver and maybe the doors under the AC controls.

It take about 10 min and about 10 screws. I did mine about 3 yrs ago.

The hardest part is disassembling the doors and putting them back together

[pauln2218]

From doing some searching, it looks like this item (MZ314057) is discontinued. Is this something I could get my hands on?

Also, I'm assuming it will fit a 2015 US Lancer, as the pillars look to be unchanged over the years.

Does anyone have any knowledge about this? I did do some searching on the site, but there is not much mention of these recently.

[triplenetz]

go to wrecker . i fixed my pillar with other early model lancer

[Metalstrix]

Hopefully when the elections come, we can get our chief buyer back xD

[burfadel]

I'm very interested in the:

RA Air Intake Snorkel
1505A265 Duct Air Clean
RRP= A$155.90+
CCJ= A$135

Need to start my modding somewhere

[Berek]

Hopefully when the elections come, we can get our chief buyer back xD

I hope so. Been waiting 6 months for parts

[ofey]

The Chief Buyer has always been around.

There is a process to follow to order parts as mentioned here.

I will be stepping aside as VIC Admin and as Chief Buyer after this election but will provide support to whomever takes over from me.

[senseye]

Hi ofey,

I'm interested in purchasing the following products:

MZ380402EX - Outer Scuff Plates - Stainless Steel (Font & Rear):
RRP=A$140+
CCJ= A$119

6370B403 Key, Door Lock Transmitter (With Boot open button):
RRP=A$157+
CCJ=A$140

I've also sent you a PM.

[philsra]

Picked up my full size spare wheel kit for RFG MR 936219. I was told it was the last one in existence as they are now obsolete . Now I just have to find a cheap 18" to keep as a spare. Waiting on my Ralliart SST foot rest as it has to come from japan. also getting some interior panels that get wear and tear while still available.
Just saying that as the CJ platform Fades some of the less used parts may become obsolete so if there's anything you want could be a good time to get.

[deadfly180]

Hi i am interested in purchasing the set of floor mats you have for the manual transmission. How can i purchase these.

Thanks

[lancerdarryl]

We don't have a chief buyer any longer,so I would suggest you go see Mitsubishi spares or have a look on eBay

[Lancer1993]

From memory the genuine ones from the dealer cost around $100, it was one of the first things I got and well worth the cost. Especially for the drivers one which is well anchored to the floor and I've never had it move, 2 years on and they still look good!

BTW eBay is no cheaper unless you can find someone selling a used set.

[bumblebee]

I bought a genuine set off ebay delivered to my door a few months ago for about $90
There is a few different styles..some have the rear in a long continues piece and some just the 2 main pieces that go under you feet etc. Just make sure you read the descriptions very well before ordering off ebay.the seller i found was based from memory in Sydney and a mitsy dealer

[Lancer1993]

Only disappointing thing about the genuine ones I got were the rear mats, they fit great but tend to move too easily with rear passengers feet.