***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Drive Belt Recall for 2008-2011 Lancers
Moderators: Moderators, Senior Moderators
- seanomccool
- Lancer Newbie
- Posts: 59
- Joined: Mon Feb 09, 2015 3:19 pm
- Location: Sydney, Australia
- big_d
- Lancer VR/GT
- Posts: 211
- Joined: Fri Jun 18, 2010 9:00 am
- Location: Wellington, New Zealand
- Contact:
Mitsubishi New Zealand say NZ new models are not affected & that they have not been informed of any recall or defect surrounding the Drive Belt.
Nothing on their website either – http://www.mmnz.co.nz/recalls/
It's weird, as my VIN number falls into the range listed on the Australian government website – https://www.recalls.gov.au/content/item ... Notice.pdf
Nothing on their website either – http://www.mmnz.co.nz/recalls/
It's weird, as my VIN number falls into the range listed on the Australian government website – https://www.recalls.gov.au/content/item ... Notice.pdf
- bunnishiwa
- Lancer Legend
- Posts: 1284
- Joined: Thu Dec 24, 2009 4:22 pm
- Location: Rye, Melbourne
Mine went to Knox today and is now waiting for parts. Also waiting for a new seal for the SST which had a small leak
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar
Noli Timere Messorem
- GS 3 port controlled wooooot
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar
Noli Timere Messorem
- belle_tb_ES
- Post Monster
- Posts: 2614
- Joined: Tue May 08, 2012 11:39 am
- Location: Hills District, NSW
I originally had it booked for the 17th April at Suttons Arncliffe but i had work so i had it booked in at Chullora instead (i got it in the same day i booked which was earlier than the original )
All done and happy that i was finally bothered to get it done
All done and happy that i was finally bothered to get it done
PRESENT: 2015 Audi S3
PAST:2009 Lancer ES called Lancee...
Garage: http://clubcj.net/garage.php?mode=view_vehicle&CID=947
I
PAST:2009 Lancer ES called Lancee...
Garage: http://clubcj.net/garage.php?mode=view_vehicle&CID=947
I
- sirlancerlot
- Lancer Newbie
- Posts: 40
- Joined: Wed Apr 01, 2015 4:36 pm
- Location: Wodonga
ok, long story short... nearly 5 months now and nothing.... Called Mitsu few weeks ago to see what is going on and they said they are waiting for a 3rd part, but they can book it in and get the service done and inspect the 3rd part (not sure what is the 3rd part,) and if is in good cond they will leave it as is till the new one will arrive.
So the car was booked in for last week (Wednesday) and also told them about my ABS issue and told them to get it checked. Anyway got a voice message from them later on that day to let me know the car is ready to be picked up... and guess what! they haven't done anything to it apart of plugging the scan tool in it. When i started to question why, they said the RA has a different engine than N/A Lancer and they have to order the parts for a 4B11T so maybe i have to wait another 5 months till the other parts will arrive. My dash cam footage shows they just drove the car up and down in the work shop and a few mechanics scratching their heads aroud it and other mechanics coming around and checking my performance mods
As per ABS pump they RECON is faulty and needs to be replaced (but i haven't got a sure answer) as they checked the voltage in the wiring loom and everything seems to be fine, side note, i haven't got a dash error in 2 weeks now, i believe it was just a battery issue as the car is not getting driven much lately, maybe once/week
So the car was booked in for last week (Wednesday) and also told them about my ABS issue and told them to get it checked. Anyway got a voice message from them later on that day to let me know the car is ready to be picked up... and guess what! they haven't done anything to it apart of plugging the scan tool in it. When i started to question why, they said the RA has a different engine than N/A Lancer and they have to order the parts for a 4B11T so maybe i have to wait another 5 months till the other parts will arrive. My dash cam footage shows they just drove the car up and down in the work shop and a few mechanics scratching their heads aroud it and other mechanics coming around and checking my performance mods
As per ABS pump they RECON is faulty and needs to be replaced (but i haven't got a sure answer) as they checked the voltage in the wiring loom and everything seems to be fine, side note, i haven't got a dash error in 2 weeks now, i believe it was just a battery issue as the car is not getting driven much lately, maybe once/week
I think i just missed this on last service
Do Mitsu Dealers care if you have aftermarket parts in your car?
Do Mitsu Dealers care if you have aftermarket parts in your car?
2009 MY10 Ralliart: http://clubcj.net/viewtopic.php?p=376629
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
-
- Lancer Evolution
- Posts: 824
- Joined: Mon Feb 14, 2011 3:58 pm
- Location: Adelaide
they only will care if it affects their ability to change the recalled part.
they follow instructions from the corporate side on how to replace parts how many techs and how long it will take.
for recalls they only get to credit a certain number of minutes\hours for their techs to work on your car.
This is so you do not pay anything for the job and the dealership cannot be out of pocket for the work.
If your vehicle is that heavily modified (ie non bolt on parts) honestly you would be going there to pickup free parts and doing it on your own.
they follow instructions from the corporate side on how to replace parts how many techs and how long it will take.
for recalls they only get to credit a certain number of minutes\hours for their techs to work on your car.
This is so you do not pay anything for the job and the dealership cannot be out of pocket for the work.
If your vehicle is that heavily modified (ie non bolt on parts) honestly you would be going there to pickup free parts and doing it on your own.
himynameisdaniel wrote:they only will care if it affects their ability to change the recalled part. they follow instructions from the corporate side on how to replace parts how many techs and how long it will take. for recalls they only get to credit a certain number of minuteshours for their techs to work on your car. This is so you do not pay anything for the job and the dealership cannot be out of pocket for the work. If your vehicle is that heavily modified (ie non bolt on parts) honestly you would be going there to pickup free parts and doing it on your own.
Mines pretty basic so shouldnt be an issue - all bolt on
So i should just call up and its a free belt service?
Finally Done, Nundah Mitsi sorted it. Though they had to apologise as the tensioner was faulty (apparently a batch have been faulty) and they will order a replacement and book me back in.
Sweet.
Sweet.
~2009 Lancer RA Sportback~
~Mods: Custom intake, TD05, TurboSmart Kompact BOV, Hyperflow 100cell Cat, Hyperflow catback exhaust and upgrade IC, 2.5" IC piping kit, GS 3-Port, NA AUtosport Dyno Tune, Optima Redtop in the boot, Koya Racing SF01 18x9 +35, BC BR Coilovers, EvolutionX Designs Coilcover~
~Mods: Custom intake, TD05, TurboSmart Kompact BOV, Hyperflow 100cell Cat, Hyperflow catback exhaust and upgrade IC, 2.5" IC piping kit, GS 3-Port, NA AUtosport Dyno Tune, Optima Redtop in the boot, Koya Racing SF01 18x9 +35, BC BR Coilovers, EvolutionX Designs Coilcover~
Who is online
Users browsing this forum: No registered users and 26 guests