Ok so about a year ago my drivers seat foam began to break (near the right hand side closest to the drivers side door) down to the point where you could feel the metal in it.
took it to my local mitsu dealer and they replaced it. now a a year later and the same thing is happeneing again. does any1 else have this problem or heard of this before. because this is now the second time i have taken it back mitsu dealer needs a rep to come down and inspect it, im not happy because honstly its the small things like this that really pee me off.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Front Drivers Seat Broken!
Moderators: Moderators, Senior Moderators
Front Drivers Seat Broken!
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
yeah but its not like im 130kg or anything.
i think it might be the actual seat or maybe the steel inside might be too sharp.
i think it might be the actual seat or maybe the steel inside might be too sharp.
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
Interesting, leather or material seats? Do you have a picture of where it is? Might have to check mine haha, I have noticed that mine has an issue at the moment where I set it up to a certain straightness, and after 1-2 days it seems to sing back about 1-2 inches, doesn't seem like a lot but makes me feel like I'm driving gangsta... haha
Good to hear they replaced it, but it is something I have not heard before.
Good to hear they replaced it, but it is something I have not heard before.
kirtis, no they are just the fabric ra seats. ill try upload a pic sometime today or tomorrow.
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
ok so update is they are going to fix it again, but this time they are going to use a thicker and dense foam to stop this from happening.
they said they are going to go to a custom upholsterer to get it fixed.
ive never heard of a company using an external company to fix something under warranty.
they said they are going to go to a custom upholsterer to get it fixed.
ive never heard of a company using an external company to fix something under warranty.
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
- Miss Wendy
- Lancer Newbie
- Posts: 24
- Joined: Sun Aug 18, 2013 4:36 pm
- Location: Newcastle
you poor thing u have had no luck at allMiss Wendy wrote:Repairer replaced the foam in my drivers seat too under warranty. Metal stuck through the bottom RHS back of drivers seat near lumbar controls.
1998 MR lancer
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5
Here is a pic. Taking it on Monday to be repaired but honestly stuff like that shouldn't happen.
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
Here is a pic. Taking it on Monday to be repaired but honestly stuff like that shouldn't happen.
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
- Miss Wendy
- Lancer Newbie
- Posts: 24
- Joined: Sun Aug 18, 2013 4:36 pm
- Location: Newcastle
Who is online
Users browsing this forum: No registered users and 46 guests