Denzza's Lancer RX 2.0 4B11T swap. **2015 UPDATE**

[denzza]

True, and anyways hell be so busy dealing with torque steer he probably wont notice it

haha you knwo me too well!

nicceee finally you can go past the cousins with your blow off valve to get da chickzzz #leblife #sutututu #VLturbo

haha damir, awks probs the only wog you know that doesnt have cuzens in AUS :p

Wow so close Denis. Need more of a write up on what was actually done and costs/parts etc.

Haha i wish i know what was going on here. Thats why i give it to the master at tuning hehe

[Seffy]

Really can't wait for the finished product.

[denzza]

NEW EXHAUST

THANKS STEVEN !!!

Also burnt the tip with a propane bottle for the blue effect

APEXI N1 EVO- R CAT BACK.

[BST50N]

Fire makes things good

[shadow-vex]

woah, nice, coming along nicely, how u finding it, as in doing the build

[Damir]

sexy exhaust

[denzza]

AND SHES UP AND RUNNING

Heres some photos, so you can see how it looks roughly and what i used.

Brass T Piece for coolant!



Custom Made Brass for vacuum. Split the PCV LINE and then goes to another T-Piece. Which then goes to the Boost Gauge and BOV.



Upper Intercooler pipe. Slightly Smacked in to be able to close the bonnet! EVO AND RA bonnets are different.



3A Racing Pod Filter. Couldnt use the stock EVO X airbox due to the battery being in the way.


Stock RA BOV. Going with the stealthy look. And dont need anything better because ill be using low boost.



Turbo manifold Turbo hinding under it !




OIL Feed for the turbo! teflon SS braided line.



45 degree sillion to fit into the throttle body.




Water feed feed for the turbo.




Enough with the photos, check the video out of it starting up for the first time!

http://www.youtube.com/watch?v=YSf4J0KWu5M


Ill keep you guys posted!


Exhaust this saturday. PHOTOS AND VIDEO WILL BE UP


ENJOY !!

[LiX]

Put a heat shield on the manifold, also this braided steel line which goes behind the manifold should be routed on the other side, under the intake. I suppose this is the oil feed line.

Also I think that the hose in which you T-ed is the brake booster line. You could not use the PCV line for vacuum/boost source.

Btw this plastic BOV was giving me very strange noises and I was scared driving with it, better change it with something better.

[Kal777]

Is it just the video or does it sound really tappy

[tbomb]

Good stuff mate

Agree with Sofia tho, tee off the FPR line for boost gauge

Maybe I've missed it but how much boost you planning on running?

[denzza]

Put a heat shield on the manifold, also this braided steel line which goes behind the manifold should be routed on the other side, under the intake. I suppose this is the oil feed line. Also I think that the hose in which you T-ed is the brake booster line. You could not use the PCV line for vacuum/boost source. Btw this plastic BOV was giving me very strange noises and I was scared driving with it, better change it with something better.

Yeah heat shield will be on soon. the oil line i cant re route.

Umm i dont think its the brake boosted lol unless the brake booster like goes to the intake manifold ? I connected a boost gauge and im getting a vacumme reading ?

Is it just the video or does it sound really tappy

Yeah its like all lancers. Noisy injector

Good stuff mate Agree with Sofia tho, tee off the FPR line for boost gauge Maybe Ive missed it but how much boost you planning on running?

I should be running between 9-12 psi

[jayce321]

its coming along awesome bro!

[LiX]

Umm i dont think its the brake boosted lol unless the brake booster like goes to the intake manifold ? I connected a boost gauge and im getting a vacumme reading ?

Of course it goes to the IM, brake booster needs vacuum.

[squala]

I can't wait to drag that at Heathcote!

[denzza]

[quote:b62aab1258=denzza]Umm i dont think its the brake boosted lol unless the brake booster like goes to the intake manifold ? I connected a boost gauge and im getting a vacumme reading ? [/quote:b62aab1258] Of course it goes to the IM, brake booster needs vacuum.

hmm werid.. ill do further testing. but my friend is using same location and its fine.

I cant wait to drag that at Heathcote!

HAHA! ill be wheel spinning like a boss