After much confusion, I've cleared up a few things.
Here are 2 part numbers which are guaranteed to work:
MY12 Aspire: 8100B801
MY12 VRX: 8100C051
The Aspire one is quoted at ~A$888 while the VRX one is being quoted at ~A$855.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
MY11 Dash cluster conversion
Moderators: Moderators, Senior Moderators
- Alileighju
- Lancer Evolution
- Posts: 816
- Joined: Sun Dec 26, 2010 12:51 am
- Location: Brisbane, QLD, Australia
ofey wrote:I suspect Anthony will come back in abit to tell us what part he got but based on the PMR part guy, heres what you want to buy: [img:ff12e1a347]http://www.autocentre.ua/images/stories/october09/Lancer_X12_.jpg[/img:ff12e1a347] MI-8100B451 METER ASSY-COMBI RRP= A$846+ CCJ=A$800 Obviously, you want the EVO version which will have the needle pointed downwards. If you have no concern about this and just want the center bit coloured: MI-8100B361 METER ASSY-COMBI RRP= A$640+ CCJ=A$605 There are a whole bunch of these parts: [img:ff12e1a347]http://s4.postimage.org/q0au0p0vx/image.jpg[/img:ff12e1a347] MI-8100B191 METER ASSY-COMBI RRP=A$680+ CCJ=A$645 As you can see this only goes up to 180km/h for JDM Galant Fortis.
My question is, will the Evo cluster with the colour LCD screen work on a 09' RA? I know the cluster with colour screen from an ASX (2012) works ok, but wonder if the evo one will work also.
Also, anyone figured out yet who in Australia can reprogram the cluster to match the km?
AK 3" Single tip exhaust | 18x9 CST Zero 1 Hyper wheels |BC-BR Coilovers | UR UICP | Synapse DV | 3-pod A-Pillar | Adj. rear camber & toe arms | AK Aluminium undertray
- chunky9
- Lancer Evolution
- Posts: 821
- Joined: Sun May 27, 2012 10:21 pm
- Location: Sydney, New South Wales
Yes evo one will fit, I have one.
And when I rang up Mitsu, they wouldnt touch the cluster even though it was all oem parts. Probably just covering their behinds in the event something dodgy happened.
And when I rang up Mitsu, they wouldnt touch the cluster even though it was all oem parts. Probably just covering their behinds in the event something dodgy happened.
My progress thread: http://clubcj.net/viewtopic.php?t=13443
chunky9 wrote:Yes evo one will fit, I have one. And when I rang up Mitsu, they wouldnt touch the cluster even though it was all oem parts. Probably just covering their behinds in the event something dodgy happened.
How did you get yours reprogrammed then to match KM?
Did the Speedometer etc need to get calibrated?
AK 3" Single tip exhaust | 18x9 CST Zero 1 Hyper wheels |BC-BR Coilovers | UR UICP | Synapse DV | 3-pod A-Pillar | Adj. rear camber & toe arms | AK Aluminium undertray
Who is online
Users browsing this forum: No registered users and 19 guests