***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
mod progress
Moderators: Moderators, Senior Moderators
-
- Lancer Newbie
- Posts: 53
- Joined: Sun Jul 29, 2012 12:03 am
- Location: Brisbane
mod progress
Hey fellow mitty lovers. I wanted to give you guys an update with whats happening so far.
I got my exhaust, intake intercooler and boost solenoid put in and got my tune done. In a 41 degree shed she pulles 301whp yay! Feels a million times better.
I wanted to also update I bought ENKEI RPF1's 18x9.5 +15 so im pretty excited for those to come in plus I am about to buy ohlin DFV coilovers. I just need to find someone who can adjust suspension properly and who can roll guards
Future plans I have two paths to go down to either get a fp red turbo, injectors, cams and a E85 tune and chill at 400whp or just say stuff it build my engine to a 2.2L and see if I can beat any aussie records.
Anyway that's the update for now chaps.
oh btw the guy in the black auto evo x with the single exhaust on the left side I hope you fix that clutch of yours man
I got my exhaust, intake intercooler and boost solenoid put in and got my tune done. In a 41 degree shed she pulles 301whp yay! Feels a million times better.
I wanted to also update I bought ENKEI RPF1's 18x9.5 +15 so im pretty excited for those to come in plus I am about to buy ohlin DFV coilovers. I just need to find someone who can adjust suspension properly and who can roll guards
Future plans I have two paths to go down to either get a fp red turbo, injectors, cams and a E85 tune and chill at 400whp or just say stuff it build my engine to a 2.2L and see if I can beat any aussie records.
Anyway that's the update for now chaps.
oh btw the guy in the black auto evo x with the single exhaust on the left side I hope you fix that clutch of yours man
- rokpapaziz
- Lancer Legend
- Posts: 1344
- Joined: Sat Aug 13, 2011 12:18 am
- Location: Brisbane
-
- Lancer Newbie
- Posts: 53
- Joined: Sun Jul 29, 2012 12:03 am
- Location: Brisbane
- Beeble
- Lancer Ralliart
- Posts: 609
- Joined: Thu Jan 27, 2011 11:20 pm
- Location: Melbourne, Australia
- Contact:
Red + cams + E85 = bye bye motor , if you have it tuned at full blast.
I would use either a step smaller in turbo, and crank it up (and have less lag), or you'll be detuning it a lilttle at peak torque.
unless you're using it to do track days or drags, then the extra top end of the Red will come in handy
Red on 98 - full blast will be fine.
congrats on getting her tuned.
it's night and day, isn't it!
I would use either a step smaller in turbo, and crank it up (and have less lag), or you'll be detuning it a lilttle at peak torque.
unless you're using it to do track days or drags, then the extra top end of the Red will come in handy
Red on 98 - full blast will be fine.
congrats on getting her tuned.
it's night and day, isn't it!
****************************
Modding or Tuning questions for your Lancer, RA or EVO? drop me a line!
http://BeebleTune.com
Modding or Tuning questions for your Lancer, RA or EVO? drop me a line!
http://BeebleTune.com
- Beeble
- Lancer Ralliart
- Posts: 609
- Joined: Thu Jan 27, 2011 11:20 pm
- Location: Melbourne, Australia
- Contact:
^^^^ this.
****************************
Modding or Tuning questions for your Lancer, RA or EVO? drop me a line!
http://BeebleTune.com
Modding or Tuning questions for your Lancer, RA or EVO? drop me a line!
http://BeebleTune.com
- rokpapaziz
- Lancer Legend
- Posts: 1344
- Joined: Sat Aug 13, 2011 12:18 am
- Location: Brisbane
-
- Lancer Newbie
- Posts: 53
- Joined: Sun Jul 29, 2012 12:03 am
- Location: Brisbane
Yeah haha thanks beeble I had a look into it and im not ready to play with fire yet hahaha I won't be getting E85 yet. Ill get a little bit larger turbo cams and push the 98 as far as it can go . Should be safer.... somewhat hehe. But absolutely the difference is night and day just wow the difference is stupid I timed from 50-150 was about 5.8 seconds which I was happy with, the pull it produces is a lot more satisfying too. Hehehe
-
- Lancer Newbie
- Posts: 53
- Joined: Sun Jul 29, 2012 12:03 am
- Location: Brisbane
-
- Lancer Newbie
- Posts: 53
- Joined: Sun Jul 29, 2012 12:03 am
- Location: Brisbane
-
- Lancer Newbie
- Posts: 53
- Joined: Sun Jul 29, 2012 12:03 am
- Location: Brisbane
bingo
http://clubcj.net/viewtopic.php?t=13358 ... sc&start=0
pics are ok i guess, in the flesh is better
http://clubcj.net/viewtopic.php?t=13358 ... sc&start=0
pics are ok i guess, in the flesh is better
Return to “Evolution X Performance”
Who is online
Users browsing this forum: No registered users and 3 guests