Washed, chamoised, clay-barred and polished
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
What did you do on your car today?
Moderators: Moderators, Senior Moderators
- ijustatecurry
- Lancer VRX/GTS
- Posts: 395
- Joined: Thu Jan 20, 2011 5:00 pm
- Location: Glen Waverley, VIC Australia
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Got the car raised, 14mm front, 10mm rear.
Now has a much more neutral rake.
Gap between wheel arch and tyre is now 2 fingers front and rear.
Now has a much more neutral rake.
Gap between wheel arch and tyre is now 2 fingers front and rear.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
another oil change - Castrol titanium edge 5w 30 oil has been put in. Will go for a run on it tonight and see what kind of difference it makes to the 10w40, if any. Gotta say, to those of you who dont change your own oil, its worth doing yourself. Its kinda fun and saves a lot of money if you change your oil qute regularly.
- Just_Nothing
- Lancer Newbie
- Posts: 69
- Joined: Wed May 09, 2012 2:25 am
- Location: Sydney. Australia
bunnishiwa wrote:ANd also installed my new silver indicator bulbs, so you cant see the Amber colour till they flash - thanks to someone else (cant remember who) who posted about then in here a while ago Looks damned good [img:af2f251ed7]http://www.clubcj.net/cached_images/1337055621_7_IS_1107_2.jpg[/img:af2f251ed7] Old bulbs [img:af2f251ed7]http://www.clubcj.net/cached_images/1337055621_7_IS_1107_3.jpg[/img:af2f251ed7] New bulbs
looks sick, might have to do the same.
you create the sound, we control the voice
Greddy SP Elite and Takeda SRI are finally on.
Greddy is louder than expected but if anything I'm happy about it.
Takeda's induction sound is glorious.
Had issues installing both but you get that (a stripped bolt and my intake hose popping off the throttle body, resulting in a chilly barefoot jog and a sliced thumb whilst adjusting it).
Remains to be seem if the SRI is on properly now but its on DAMN tight.
Greddy is louder than expected but if anything I'm happy about it.
Takeda's induction sound is glorious.
Had issues installing both but you get that (a stripped bolt and my intake hose popping off the throttle body, resulting in a chilly barefoot jog and a sliced thumb whilst adjusting it).
Remains to be seem if the SRI is on properly now but its on DAMN tight.
- bunnishiwa
- Lancer Legend
- Posts: 1284
- Joined: Thu Dec 24, 2009 4:22 pm
- Location: Rye, Melbourne
Tac89 wrote:Where do you get the indicator bulbs from? Looks heaps better.
http://www.ebay.com.au/itm/200639102190 ... 1439.l2649
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar
Noli Timere Messorem
- GS 3 port controlled wooooot
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar
Noli Timere Messorem
My first oil change - 5600kms after purchase. OEM filter and Mobil 1 0W-40.
Existing oil was Castrol Magnetec Pro 5W-40 put in by the dealer, that caused the engine to sound rough/harsh at the high end, and I would avoid revving it past 4krpm for that reason. I didn't really fully trust the protection of a semi-synthetic oil in a turbo.
A quick drive around the block with the new oil and it seems to be smoother and more quiet.
Existing oil was Castrol Magnetec Pro 5W-40 put in by the dealer, that caused the engine to sound rough/harsh at the high end, and I would avoid revving it past 4krpm for that reason. I didn't really fully trust the protection of a semi-synthetic oil in a turbo.
A quick drive around the block with the new oil and it seems to be smoother and more quiet.
- bunnishiwa
- Lancer Legend
- Posts: 1284
- Joined: Thu Dec 24, 2009 4:22 pm
- Location: Rye, Melbourne
Ran the main power cable from cabin to new fuse holder in engine bay
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar
Noli Timere Messorem
- GS 3 port controlled wooooot
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar
Noli Timere Messorem
- bunnishiwa
- Lancer Legend
- Posts: 1284
- Joined: Thu Dec 24, 2009 4:22 pm
- Location: Rye, Melbourne
Who is online
Users browsing this forum: No registered users and 87 guests