***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* Body Kit (V&C F-Lip + Evo Bump/Fender) Group

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Apr 16, 2009 3:09 pm

Nicho wrote:Yeah I am going to get the centre lip as long as the shipping is not astronomical. Also what is going on with the scuff plates? Something was said about getting a better price but nothing else has been said..


We're still awaiting these new sponsors to come on board. In the meantime, I've asked our current sponsors to push the price some more. I will be starting a thread soon on these Mitsubishi Parts for their group buy and somehow I think they'll budge a little on the price after that I'm not so sure how much more our new sponsors can take the price down to. It has to end somewhere.

I will allow people to purchase on the current offer price once I get their threads up.

User avatar
aussie027
Lancer Ralliart
Lancer Ralliart
Posts: 554
Joined: Tue Nov 04, 2008 4:02 am
Location: Perth, WA, Australia

Postby aussie027 » Thu Apr 16, 2009 5:30 pm

I am still possibly interested in centre lip depending on final part price and shipping cost to Perth since I will likely be the only one here if I go ahead with it.
Lowest priority shipping would be fine as I certainly am in no rush at all for it.
It can come by regular snail mail if that is the cheapest instead of 3 day DHL/FEDEX or whatever.
I FIND YOUR LACK OF FAITH DISTURBING......
Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Apr 16, 2009 5:58 pm

aussie027 wrote:I am still possibly interested in centre lip depending on final part price and shipping cost to Perth since I will likely be the only one here if I go ahead with it.
Lowest priority shipping would be fine as I certainly am in no rush at all for it.
It can come by regular snail mail if that is the cheapest instead of 3 day DHL/FEDEX or whatever.


What we will be doing is group shipping to Melbourne since we have the bulk of the people here. Then forwarding on. So I'm sure it'll be quite low from here to you.

I will add you to the list for now.

User avatar
aussie027
Lancer Ralliart
Lancer Ralliart
Posts: 554
Joined: Tue Nov 04, 2008 4:02 am
Location: Perth, WA, Australia

Postby aussie027 » Thu Apr 16, 2009 6:16 pm

ok ofey thanks
I FIND YOUR LACK OF FAITH DISTURBING......

Image

User avatar
Nicho
Lancer VR/GT
Lancer VR/GT
Posts: 232
Joined: Sun Jan 18, 2009 7:30 am
Location: Melbourne, VIC, Australia

Postby Nicho » Thu Apr 16, 2009 7:41 pm

ofey wrote:
Nicho wrote:Yeah I am going to get the centre lip as long as the shipping is not astronomical. Also what is going on with the scuff plates? Something was said about getting a better price but nothing else has been said..


We're still awaiting these new sponsors to come on board. In the meantime, I've asked our current sponsors to push the price some more. I will be starting a thread soon on these Mitsubishi Parts for their group buy and somehow I think they'll budge a little on the price after that I'm not so sure how much more our new sponsors can take the price down to. It has to end somewhere.

I will allow people to purchase on the current offer price once I get their threads up.


Ok when you reach the final price whether it is better or not can you please PM me in case I miss the thread but I will most likely see it. Thanks for all your efforts and hard work

User avatar
ANDROS
Lancer Legend
Lancer Legend
Posts: 1031
Joined: Wed Mar 18, 2009 8:41 am
Location: Melbourne, VIC, Australia

Postby ANDROS » Thu Apr 16, 2009 11:01 pm

any estimates of what the shipping cost will be?
___________________________________________________

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Apr 16, 2009 11:29 pm

ANDROS wrote:any estimates of what the shipping cost will be?


Shipping is being shared by everyone in the group buy. We will be group shipping so it depends on how many are in it. I can't say now that's the problem. We can't dispatch all to one address as that will blow the A$1000 tax free limit the Australian Customs set for us. And sending >3 of the same item to the same address is still suspicious.

As I said before, I'm hoping to do it for A$300 flat for part A and A$150 for part B. Our supplier has promised to charge us cost for shipping.

This group buy closes tomorrow.

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Fri Apr 17, 2009 9:48 am

Hi ofey - can you please put me down for the smaller centre lip - thank you.
ClubCJ's first Sportback

dumb&

Postby dumb& » Fri Apr 17, 2009 9:56 am

That will make shipping a bit cheaper for us here in NSW Bandit. Nice one :)

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Fri Apr 17, 2009 10:43 am

I reckon getting it painted white and fitting it in the middle will look good, a bit like the Ralliart lip. Plus it won't get wrecked on my driveway!
ClubCJ's first Sportback

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Apr 17, 2009 1:19 pm

Guys this is closing today. For anyone still thinking, can you please decide now? The dealer has reiterated that this price will NEVER be matched in future.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
aussie027
Lancer Ralliart
Lancer Ralliart
Posts: 554
Joined: Tue Nov 04, 2008 4:02 am
Location: Perth, WA, Australia

Postby aussie027 » Fri Apr 17, 2009 1:35 pm

So what was determined to be the FINAL part price and total shipping price for the centre lip???

Is it $105plus $150AUD?????
I FIND YOUR LACK OF FAITH DISTURBING......

Image

qudans
Lancer VR/GT
Lancer VR/GT
Posts: 218
Joined: Sat Nov 15, 2008 3:47 pm
Location: Melbourne, VIC, Australia

Postby qudans » Fri Apr 17, 2009 1:39 pm

It's a great deal guys get on it, I was initially quoted $378US delivered when i first contacted the seller with intent to purchase. That equates to about $525AUD in current exchange rates. Ofey has got this price to almost half of this, so I strongly suggest if your interested to make some quick decisions!

qudans
Lancer VR/GT
Lancer VR/GT
Posts: 218
Joined: Sat Nov 15, 2008 3:47 pm
Location: Melbourne, VIC, Australia

Postby qudans » Fri Apr 17, 2009 1:40 pm

There is no final shipping price yet, ofey has already stated that we need firm numbers before a quote can be given, refer to original post. And I also believe he said he was aiming for 150AUD delivered for that centre piece, although this cannot be absolute confirmed for the above reason.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Apr 17, 2009 1:45 pm

once again, I have to repeat that I'm group shipping. I have some volunteers of recievers here in Vic where the bulk of the orders are coming. So as to beat the GST, I need to pack < A$1000 worth (postage included) in each consignment. That's the only way I can save us abit. We cannot lie about the price of each by much as they'll check on the internet on a bodypart price. Since there are so many pieces, I too can't call it commercial samples.

We will get around the system. Just need the firm numbers. As I said before I'm aiming <A$150 for the center lip and < $300 for the V-Lip
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 11 guests