***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

SMOKIN

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

n_aghdassi
Lancer ES/EX
Lancer ES/EX
Posts: 160
Joined: Mon Jun 13, 2011 9:11 pm
Location: Perth

SMOKIN

Postby n_aghdassi » Mon Sep 05, 2011 1:04 am

After a fun filled day of installing a sound system in the es, we sat down with a beer and plugged in the battery...

that's when the fun began... after i plugged it in within seconds smoke arose from under the drivers seat. and also a loud noise

turns out dad had got two yellow wires mixed up for the rear divers side speakers. so that yellow line is fried.....

ill get a picture up soon.

any suggestions?

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Mon Sep 05, 2011 7:00 am

Need pics to see what wires you are talking about...

User avatar
Fitter
Club Vendor
Club Vendor
Posts: 1288
Joined: Mon Mar 29, 2010 1:34 pm
Location: Brisbane

Postby Fitter » Mon Sep 05, 2011 7:11 am

Speaker lines around the wrong way won't cause smoke. All that will do is put that speaker out of phase.

What amp, what gauge wiring, what fuse size under the bonnet?

If there was a short on the power cable then fuse would blow.

My guess us power supply in amp but really need to know what gear and what else was amp running.
CLUB CJ CAR AUDIO VENDOR
Owner and Builder of Australia's LOUDEST STREET LEGAL Lancer 147.5dB

2013 WORLD TITLE
2012 QLD State Champion
2008 Australian Champion

Image

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Mon Sep 05, 2011 8:41 am

Amateur hour much, I always ALWAYS triple check every single connection and cut I make before I go any where near the battery. Your not glueing on cheap ebay parts here it is a very real possibility that you could have set your car on fire or even bricked the entire electronics system if you shorted the car that well.

I see it all the time here people try things themselves and F#@% it up or do a S#$% poor job of it. Take your time, think about what you are doing and pay close attention to detail. Makes me scared about even considering buying a second hand car.

n_aghdassi
Lancer ES/EX
Lancer ES/EX
Posts: 160
Joined: Mon Jun 13, 2011 9:11 pm
Location: Perth

Postby n_aghdassi » Mon Sep 05, 2011 9:18 am

see it was a wire from the amp that was suppose to go to the rear speaker. but it was connected to another yellow cable that ran under the seat. that entire wire is fried

User avatar
Fitter
Club Vendor
Club Vendor
Posts: 1288
Joined: Mon Mar 29, 2010 1:34 pm
Location: Brisbane

Postby Fitter » Mon Sep 05, 2011 9:42 am

So u tapped into a wire that u don't know what it was? Always run fresh wiring to speakers from amps :) eliminate any chance of using wrong wires. Be glad u didnt put a charge into the airbag system.
CLUB CJ CAR AUDIO VENDOR

Owner and Builder of Australia's LOUDEST STREET LEGAL Lancer 147.5dB



2013 WORLD TITLE

2012 QLD State Champion
2008 Australian Champion


Image

User avatar
Fitter
Club Vendor
Club Vendor
Posts: 1288
Joined: Mon Mar 29, 2010 1:34 pm
Location: Brisbane

Postby Fitter » Mon Sep 05, 2011 10:02 am

As someone who installs stereos everyday I get 3 or 4 jobs a week of fixing up home jobs. We double what we would normally charge to install to compensate the time to sort out and clean up what's been done.
CLUB CJ CAR AUDIO VENDOR

Owner and Builder of Australia's LOUDEST STREET LEGAL Lancer 147.5dB



2013 WORLD TITLE

2012 QLD State Champion
2008 Australian Champion


Image

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Mon Sep 05, 2011 10:06 am

I thought the yellow wire under seat would have been the airbag system, is in my VRX

User avatar
justin
Lancer VR/GT
Lancer VR/GT
Posts: 290
Joined: Thu Jun 09, 2011 2:08 pm

Postby justin » Mon Sep 05, 2011 10:33 am

gotta say i have done a few installs now and never heard of any frying/smoke... but i guess if u destroyed the cable then its more than possible...
but for future reference you should never wire something up to an unknown cable, use something like a 9v battery or a test pen to see what speaker is which and to see the correct powers...
there should be some wiring diagrams out there as well mate, i wish i had the link but there is actually a site that will tell you every wire in any car and were it goes etc for all stereo items in your car.... but i lost it a year or two back, but simply check at each end of it, you should run new cable but sometimes its not always nessasary or easy to do... can be quiet fiddly in car door boots if you havent done it before....
either way it sounds like it could be your amp fuse, generally if you put power into the amp speaker lines the fuse will blow and melt.... thus giving u a plastic smell and can some times smoke... check the fuse on the amp, find out what the cable does and replace it.... check all your lines are correct and fix it up mate....
without seeing it i dont think anyone can really help as to yet.

User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Mon Sep 05, 2011 10:36 am

Oh my...
Image

User avatar
bryzabone
Lancer VR/GT
Lancer VR/GT
Posts: 202
Joined: Mon Feb 22, 2010 12:18 am
Location: Alstonville, NSW

Postby bryzabone » Mon Sep 05, 2011 3:19 pm

Thats a bummer man! 1st time installs can be a bit nerve wracking.
im sure someone will come up with a wiring diagram for you. i found this, from mr charisma:
My aftermarket harness has:
Yellow - Constant 12V
Red - Acc 12V
Black - Ground
Orange - Illumination
Blue - Aerial
Blue / White - Remote Turn On
Green - Handbrake
Speaker wires ( white, grey, green, purple )

from this thread, might be helpful.
http://clubcj.net/viewtopic.php?t=7841& ... ker+wiring

So long as the car starts, and runs, with no warnings, i'd say no terminal damage... I would recommend pulling all fuses related to the headunit/amps etc. you've installed, till the wiring is checked out with a multimeter though mate.

Good luck with it! and don't give up, home installs are extremely satisfying, i've done all my cars myself, and the music sounds sweeter when its your own work! :)
For every "Drive Safely" sign, shouldn't there be a "Resume Normal Driving" sign?

User avatar
Fitter
Club Vendor
Club Vendor
Posts: 1288
Joined: Mon Mar 29, 2010 1:34 pm
Location: Brisbane

Postby Fitter » Mon Sep 05, 2011 5:54 pm

byran, thats generic aftermarket headunit wiring loom colours, not amplifier wiring going into factory wiring
CLUB CJ CAR AUDIO VENDOR

Owner and Builder of Australia's LOUDEST STREET LEGAL Lancer 147.5dB



2013 WORLD TITLE

2012 QLD State Champion
2008 Australian Champion


Image

n_aghdassi
Lancer ES/EX
Lancer ES/EX
Posts: 160
Joined: Mon Jun 13, 2011 9:11 pm
Location: Perth

Postby n_aghdassi » Tue Sep 06, 2011 12:50 am

thanks guys. all the electrics besides the rear door work fine. took the car into an auto elec to fix the power then to a audio fitter to fix the job.
i thought it was worth the shot

User avatar
Fitter
Club Vendor
Club Vendor
Posts: 1288
Joined: Mon Mar 29, 2010 1:34 pm
Location: Brisbane

Postby Fitter » Tue Sep 06, 2011 3:43 am

Cost more now then just going to pro fitter in first place lol

Next time fly me over lol I do discounts for ccj members
CLUB CJ CAR AUDIO VENDOR

Owner and Builder of Australia's LOUDEST STREET LEGAL Lancer 147.5dB



2013 WORLD TITLE

2012 QLD State Champion
2008 Australian Champion


Image


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 17 guests