***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

NSW GB Pick up Friday 1st July Sydney Olympic Park

Local NSW State News, Meets, Cruises, Information & Talk.

Moderators: Moderators, Senior Moderators

User avatar
BrownSound
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 446
Joined: Thu Feb 10, 2011 9:57 pm
Location: Sydney, Australia

Postby BrownSound » Mon Jun 27, 2011 7:48 pm

RAwannabe and Coolwave911 came by and grabbed their stuff. So not a total waste of time heh.

As for other locations, if there isn't an event going on in front of ANZ Stadium is great. Very will lit and normally 2p. But I'm not sure if there is anything on this Friday.

User avatar
coolwave911
Lancer Newbie
Lancer Newbie
Posts: 72
Joined: Sat Apr 16, 2011 12:13 am
Location: Sydney, Australia

Postby coolwave911 » Mon Jun 27, 2011 8:32 pm

BrownSound wrote:RAwannabe and Coolwave911 came by and grabbed their stuff. So not a total waste of time heh.

As for other locations, if there isn't an event going on in front of ANZ Stadium is great. Very will lit and normally 2p. But I'm not sure if there is anything on this Friday.


Hey Naheen, thanks for your time man, I really appreciate it. Was a bit short on time and all but it was nice to meet you & grabbed my stuff. Will catch up on Friday.

PS: We have the same car colour LOL

User avatar
RAwannabe
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 389
Joined: Sun Jan 09, 2011 12:29 am
Location: NSW Australia

Postby RAwannabe » Mon Jun 27, 2011 8:58 pm

BrownSound wrote:RAwannabe and Coolwave911 came by and grabbed their stuff. So not a total waste of time heh.

As for other locations, if there isn't an event going on in front of ANZ Stadium is great. Very will lit and normally 2p. But I'm not sure if there is anything on this Friday.


Once again thank you so much Naheen, really appreciate it. Sorry didn't have much time to stay around today, got reports I need to finish for a meeting at work tomorrow, but I will join you again on Friday, will catch then.

User avatar
BrownSound
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 446
Joined: Thu Feb 10, 2011 9:57 pm
Location: Sydney, Australia

Postby BrownSound » Mon Jun 27, 2011 11:20 pm

No worries guys. Maybe you can get your new toys installed before Friday ;)

User avatar
coolwave911
Lancer Newbie
Lancer Newbie
Posts: 72
Joined: Sat Apr 16, 2011 12:13 am
Location: Sydney, Australia

Postby coolwave911 » Tue Jun 28, 2011 12:00 am

BrownSound wrote:No worries guys. Maybe you can get your new toys installed before Friday ;)


Don't see anything stopping me from doing that atm :))

Andrew: Missed the chance to meet u mate, lol See u on Friday then hehe

User avatar
RAwannabe
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 389
Joined: Sun Jan 09, 2011 12:29 am
Location: NSW Australia

Postby RAwannabe » Tue Jun 28, 2011 1:15 pm

just installed it late last night, I should've done it properly, now is closer to the driver side, not in the middle middle, dammit!

I now have the cut out piece which can be used as template, if anyone want to use it to draw the lines in their car I can bring it on Friday, the one you print out with printing paper is too soft, couldn't really use it to draw the cutting line.

Ryan: sure thing see you on Friday.

User avatar
coolwave911
Lancer Newbie
Lancer Newbie
Posts: 72
Joined: Sat Apr 16, 2011 12:13 am
Location: Sydney, Australia

Postby coolwave911 » Tue Jun 28, 2011 3:08 pm

Haha Andrew, u shouldn't rushed doing it spot on.....

I installed my paddle & media control mudole this morning. Was in a hurry as I need the car within an hour so I rushed but cause everything was easy plug & play so no problem at all. Feels like driving a VRX now LOL Just the front lip, side skirt and a EVOX spoiler and I have finished my moddings budget for this year

User avatar
Slash
Lancer Ralliart
Lancer Ralliart
Posts: 651
Joined: Tue May 17, 2011 3:07 pm
Location: Sydney

Postby Slash » Tue Jun 28, 2011 3:10 pm

I wish I had your modding control Coolwave! :(

User avatar
RAwannabe
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 389
Joined: Sun Jan 09, 2011 12:29 am
Location: NSW Australia

Postby RAwannabe » Wed Jun 29, 2011 10:04 pm

coolwave911 wrote:Haha Andrew, u shouldn't rushed doing it spot on.....

I installed my paddle & media control mudole this morning. Was in a hurry as I need the car within an hour so I rushed but cause everything was easy plug & play so no problem at all. Feels like driving a VRX now LOL Just the front lip, side skirt and a EVOX spoiler and I have finished my moddings budget for this year


hey Ryan I fixed mine! it's now sitting right at the center, perfect fitment, no need for glue just clip back on, really like this product.

User avatar
dannyboi
Lancer Evolution
Lancer Evolution
Posts: 818
Joined: Sat Jun 26, 2010 8:53 pm
Location: Sydney, Australia

Postby dannyboi » Thu Jun 30, 2011 10:52 am

I'll try to make it free so I can pop by to pick up my stuff and say hi.

User avatar
BrownSound
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 446
Joined: Thu Feb 10, 2011 9:57 pm
Location: Sydney, Australia

Postby BrownSound » Thu Jun 30, 2011 1:09 pm

Are we just meeting in the same spot? or will are meeting somewhere else?

User avatar
Mizta B
Alumni
Alumni
Posts: 5867
Joined: Sun Dec 21, 2008 8:29 am
Location: Mortdale, NSW, Australia

Postby Mizta B » Thu Jun 30, 2011 2:56 pm

I'll be coming straight from work so let us know if the meet point changes
See you all then
Cheers Chris.... :wink:
Australasian Gerbil Rearers Organisation, Official Re-Seller.
Image
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....


Return to “New South Wales”

Who is online

Users browsing this forum: Google [Bot] and 22 guests