*CLOSED* Russian Website Parts Auto-loker GB

[Fisherrr]

Hello guys,

I am here to introduce myself as It happened that I was talking to the Russian guys on behalf of Ofey.

I am fluent in Russian, so I am happy to assist in this, as well as with the questions you are asking here guys. Most of them are explained at the Auto-Locker website. Unfortunately google translation is at no use when it comes to some details. If I can see that this is the case, I will be answering your questions.

As also discussed with Ofey, if some questions would require an additional contact with Auto-Locker, I will be collecting them and will be solving them in one go. It is beneficial for us to be constructive with the supplier, especially at the very first contact.

[bd-850]

Hello guys,

I am here to introduce myself as It happened that I was talking to the Russian guys on behalf of Ofey.

I am fluent in Russian, so I am happy to assist in this, as well as with the questions you are asking here guys. Most of them are explained at the Auto-Locker website. Unfortunately google translation is at no use when it comes to some details. If I can see that this is the case, I will be answering your questions.

As also discussed with Ofey, if some questions would require an additional contact with Auto-Locker, I will be collecting them and will be solving them in one go. It is beneficial for us to be constructive with the supplier, especially at the very first contact.

Thank you Nick for Helping Ofey with this.

Greatly appreciated

[tjoz]

Have any of you guys used XE before for currency conversions? It takes alot of the 'how much is this in our money' questions out. Use the site, give Ofey your money, a few extra dollars just in case the dollar goes either way before the final order/payment goes through. Anything left over goes back into the club.

http://www.xe.com/

[Itachi]

Hi Nick, cheers for translating for the rest of us!

Who knew Russian would be more useful than Japanese when looking for Mitsubishi parts.

Does it say anywhere on the site if you can get the rear diffuser (see my earlier post) with the outside painted and the inside matte black? In some of the pictures on their site it seems like they may have done this, but they are all on dark cars so it may just be a trick of the light...

[Chubb]

for $50 give or take I would interested in the Central lip. My only question would be the blue they have is Lightning Blue (aus spec) or Octane Blue (USA spec) ??

[Fisherrr]

CENTRAL LIP
R1500 ~/= $A30

THIS LIP FITS FACTORY FRONT AIRDAMS. THE PRICE ADVERTISED IS FOR MATT BLACK. CAN BE PAINTED IN A LANCER COLOR BY REQUEST. PRICE MUST BE REQUESTED.

PLEASE FIND BELOW SOME PHOTOS:
4- CENTRAL LIP
2 - FACTORY FRONT AIRDAMS

SOME PAGES BELOW WHERE THIS LIP CAN BE SPOTTED:

http://www.auto-loker.ru/_vstavka_klykov.shtml
http://www.auto-loker.ru/_podium.shtml

ATTENTION: FACTORY FRONT AIRDAMS. ADVERTISED PRICE INCLUDES PAINTING!!!
R5000 ~/= A$167

[Fisherrr]

Hi Nick, cheers for translating for the rest of us!

Who knew Russian would be more useful than Japanese when looking for Mitsubishi parts.

Does it say anywhere on the site if you can get the rear diffuser (see my earlier post) with the outside painted and the inside matte black? In some of the pictures on their site it seems like they may have done this, but they are all on dark cars so it may just be a trick of the light...

I am in progress of detailed post preparation. In short: yes, there are 3 options of painting. coming soon, mate

[vlad_the_impaler]

CENTRAL LIP
R1500 ~/= $A30

THIS LIP FITS FACTORY FRONT AIR FENDERS. THE PRICE ADVERTISED IS FOR MATT BLACK. CAN BE PAINTED IN A LANCER COLOR BY REQUEST. PRICE MUST BE REQUESTED.

PLEASE FIND BELOW SOME PHOTOS:
4- CENTRAL LIP
2 - FACTORY AIR FENDERS

SOME PAGES BELOW WHERE THIS LIP CAN BE SPOTTED:

http://www.auto-loker.ru/_vstavka_klykov.shtml
http://www.auto-loker.ru/_podium.shtml

ATTENTION: FACTORY AIR FENDERS ADVERTISED PRICE INCLUDES PAINTING!!!
R5000 ~/= A$167

slight correction Nick- FRONT AIRDAMS not AIR FENDERS

[liam92]

Are the backlit badges $100 for the pair or each? Im keen if its a pair!

And as I said up there^^ Im up for a number plate holder, either matched to the lightening blue (d06?) or black

[SAM-24A]

These Scuff Plates look great.

Very Low Profile Line with a Smooth Folded Edge, finished in Brushed Stainless Steel with etched Lancer Logo.

I'll take a set for 3000rup $90 (Aus) + P&H.

[Itachi]

I am in progress of detailed post preparation. In short: yes, there are 3 options of painting. coming soon, mate

Thank you sir, you are both a gentleman and a scholar! Sorry for bugging you I'm just super keen for this, especially now I can get it the way i want it

Sam, those scuff plates are very nice. I have the mitsu ones and I can already see them deteriorating around the edges. Seeing as these are folded over I can't see that happening so definitely a good choice!

[Fisherrr]

THANKS for the correction, Vlad!

[Speedie]

Interested in licence plate holder. Any ideas on shipping costs?

[liam92]

Stop posting products! I need to save to afford my leather seats from shaddows!

[feral]

Hi If can make payment on 15 November i'll get the illuminated front and rear logo's (on overseas holiday leaving tomorrow). If ok pm cost and payment details. Thanks