small disks? Mine are 300mm diameter. That is stock size, and the stock brakes are good enough anyway, just need slight upgrade.
And if we were to increase the disk size, we do run into trouble relocating the caliper etc
So its just easier to upgrade to better disks and pads, as they're still daily drivers anyway.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* EBC Pads & RDA Rotors
Moderator: Senior Moderators
SIR-VRX wrote:small disks? Mine are 300mm diameter. That is stock size, and the stock brakes are good enough anyway, just need slight upgrade.
And if we were to increase the disk size, we do run into trouble relocating the caliper etc
So its just easier to upgrade to better disks and pads, as they're still daily drivers anyway.
lzy_eye wrote:You have to make the discs the same diamater as OEM, as you say due to the calipers.
Remember these wheels are 18" so it makes the discs look pretty small. By comparison the CJ has pretty decent sized brakes.
I wasn't sure, which is why I asked about it
The 18's just make them look ridiculously small, even smaller if you had after market wheels that let you see more of the brakes.
SIR-VRX wrote:only the es or vr brakes look small
Nah, VRX brakes are still puny. It's just the OEM wheels that hide this.
http://img262.imageshack.us/img262/56/amg2ea1.jpg
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
hi all, we're back with R2 of this group buy.... . See first post of thread for details... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
For those who have RAs or their callipers, It's a very confusing issue for the pads. Please see:
For RA sizing issues, please read:
Front/rear Brake Info
or
RalliArt Brakes
or
2009 Ralliart - Brake Guide
If you can figure things out, please provide:
RA Pads:
Front-
Greenstuff = ???
Redstuff = ???
Rear-
Greenstuff = ???
Redstuff = ???
RA Rotor size
Front =??
Rear = ??
For RA sizing issues, please read:
Front/rear Brake Info
or
RalliArt Brakes
or
2009 Ralliart - Brake Guide
If you can figure things out, please provide:
RA Pads:
Front-
Greenstuff = ???
Redstuff = ???
Rear-
Greenstuff = ???
Redstuff = ???
RA Rotor size
Front =??
Rear = ??
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Just to give you guys a heads up.
If you are looking at doing any track days etc, I would strongly recommend the red stuff from the EBC range.
I had the green stuff from the last group buy and they just couldn't cope. If you are not being too hard on your brakes, the green stuff will certainly suffice.
If you are looking at doing any track days etc, I would strongly recommend the red stuff from the EBC range.
I had the green stuff from the last group buy and they just couldn't cope. If you are not being too hard on your brakes, the green stuff will certainly suffice.
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 13 guests