***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

ofey's Leftovers Sale - Everything must go! (20/25 sold)

Want to sell something, Post it up and sell it here. *Conditions Apply- Please read - http://clubcj.net/viewtopic.php?t=2085

Moderators: Moderators, Senior Moderators

User avatar
BRO-027
Lancer Newbie
Lancer Newbie
Posts: 89
Joined: Tue Apr 06, 2010 12:54 pm
Location: Goulburn/NSW

Postby BRO-027 » Mon Aug 09, 2010 5:06 pm

ofey wrote:The VRX spoiler I'm selling is NOT OEM. It's a 3rd party copy which is why I said VRX-style.

The price I quoted you for the VR spoiler is a Mitsubishi ORIGINAL part. They come painted. I have no control on it.

Please bear in mind, I am not a dealer nor do I work for Mitsu. I'm simply a club member like you so I can't say to Mitsu not to paint it.


My bad, i wasnt having a go at you or anything.. From what ive seen you put yourself out there and do a lot for everyone on these forums within the goodness of your heart or next to no profit, ya have to respect that.

On another note, can you get any NON-OEM lip spoilers at a different price? Or would the one you already mentioned be the only option?

By the way i think this takes me over the 20 posts!
:)

User avatar
AJjnr86
Lancer Legend
Lancer Legend
Posts: 1338
Joined: Fri Jun 18, 2010 8:22 pm
Location: Maitland, NSW

Postby AJjnr86 » Mon Aug 09, 2010 5:08 pm

@kayman

The oem vrx spoiler apparently sits in the middle of ur view from the rear view mirror, so ofey is saying that these sit just a little higher, I wouldn't imagine too much higher
Image

OHH YEA!!!!

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Aug 09, 2010 5:09 pm

kayman wrote:Hi Ofey, sorry to bother so much but when u said the spoiler is higher then vrx were you saying in tad's pic or the ones your selling?

just dont like them too high shopping trolley style (personal preference) i think the oem vrx one is just about right.


Yes the CF spoiler is higher than the VRX one. In fact it's the highest of all three. Their heights at their highest points when placed flat on the carpet are are:

14. New VRX-Style Spoiler Unprimed (13.8cm)
15. New VRX-Style CF Spoiler (24.6cm)
16. New Evo X Style CF Spoiler(23.5cm)
Last edited by ofey on Mon Aug 09, 2010 5:26 pm, edited 1 time in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Aug 09, 2010 5:20 pm

BRO-027 wrote:My bad, i wasnt having a go at you or anything.. From what ive seen you put yourself out there and do a lot for everyone on these forums within the goodness of your heart or next to no profit, ya have to respect that.

On another note, can you get any NON-OEM lip spoilers at a different price? Or would the one you already mentioned be the only option?

By the way i think this takes me over the 20 posts!
:)


Thanks for that but I find being nice hasn't really helped myself very much. Still get conned by the odd fellow member or two.

No I can't. You could check ARS who are sponsors on our club. I think they have a lip spoiler. I think theirs is US$56 + freight from Malaysia.

Though you get what you pay for.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
greatapoc
Lancer Newbie
Lancer Newbie
Posts: 31
Joined: Sat Jun 12, 2010 1:04 pm
Location: Newcastle, Australia

Postby greatapoc » Mon Aug 09, 2010 5:39 pm

What's the damage like on the front air dam extensions?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Aug 09, 2010 5:40 pm

greatapoc wrote:What's the damage like on the front air dam extensions?


6. Used Stock Front Air Dams w/ all screws in A39 Grey = A$75
+ postage at your expense.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
greatapoc
Lancer Newbie
Lancer Newbie
Posts: 31
Joined: Sat Jun 12, 2010 1:04 pm
Location: Newcastle, Australia

Postby greatapoc » Mon Aug 09, 2010 6:04 pm

Sorry by damage I meant literally hehe. Scratches etc.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Aug 09, 2010 6:16 pm

None on the front.
None from visible eyeline.
Some scratches on the bottom.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
greatapoc
Lancer Newbie
Lancer Newbie
Posts: 31
Joined: Sat Jun 12, 2010 1:04 pm
Location: Newcastle, Australia

Postby greatapoc » Mon Aug 09, 2010 6:28 pm

I'll take them then if they haven't been claimed already.

User avatar
liam92
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 306
Joined: Fri Jul 02, 2010 8:47 pm

Postby liam92 » Mon Aug 09, 2010 6:56 pm

Ofey can I please have

1. New Front Lower Bar UR-LA4-442 (1.8KG) = A$100
2. New Rear Lower Bar / Rear member brace UR-RLS4-443P () = A$80

-how hard are these to fit? easy as they look pics wise? Do you have to drill out the car or use predrilled mounts?

and the

9. New Concept Evo Nose = A$90 (assuming its the one on the right in the photos) - this will fit my VRX wont it? cutting the windows out ofcourse?

Cheers Liam

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Aug 09, 2010 7:26 pm

@greatapoc: IF you look further up bunnishiwa has said he wants them though he hasn't PM-ed me. If he doesn't reply to my PM, I'll sell them to you. Fair deal?

@Liam I will PM you payment details but in the meantime to answer you questions:

They need you to take out the stock screws and then put them through the holes on the strut. I think with 443P, you will need to go to Bunning and buy 2 washers costing you about A$4 to fit on as the screws aren't large enough.

As for the nose, yes it's this one. And it was designed for the VRX. Yes you will need to cut them holes.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
liam92
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 306
Joined: Fri Jul 02, 2010 8:47 pm

Postby liam92 » Mon Aug 09, 2010 7:31 pm

Perfect, Ill make payment once i have your details. Do you need a postcode?

WTR
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Sun Apr 04, 2010 8:16 pm
Location: Hawkesbury, NSW

Postby WTR » Mon Aug 09, 2010 8:03 pm

Good evening, ofey ..... may I have the mirror covers (Item #20) + postage to NSW ?

Please PM payment details for bank transfer.

Cheers, Ron.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Aug 09, 2010 8:26 pm

WTR: PM-ed.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
BrownDog
Lancer Ralliart
Lancer Ralliart
Posts: 716
Joined: Wed Feb 10, 2010 7:31 pm
Location: Perth, WA

Postby BrownDog » Mon Aug 09, 2010 8:30 pm

Ofey

i pmed about the fog lights both 4 and 5

cheers
BrownDog
Matt
MODS DONE
Sound System
Exhaust
Tint
Rear Sway Bar

MODS TO DO
Wheels
Lips/ Bodykit
Install in-car LEDs


Return to “For Sale Section”

Who is online

Users browsing this forum: No registered users and 3 guests