***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Deano: LED DRL's

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
Deano1964
Lancer Evolution
Lancer Evolution
Posts: 773
Joined: Tue Mar 17, 2009 12:22 am
Location: Melbourne, VIC, Australia

Postby Deano1964 » Tue Jul 06, 2010 12:35 pm

Basically they come pre wired.
They come pre wired on both sides of the strip so that u can split them in half and it still be wired.
All you need to do is power/ground.
I spliced mine into parking lights so that if i forget to turn the switch off and i turn of the car, they go off.

Image

In my first post in this thread i used 2x "6inch"
and then i changed them to 2x "1 foot"
Image
User avatar
Deano1964
Lancer Evolution
Lancer Evolution
Posts: 773
Joined: Tue Mar 17, 2009 12:22 am
Location: Melbourne, VIC, Australia

Postby Deano1964 » Tue Jul 06, 2010 12:38 pm

Blakey wrote:
Deano1964 wrote:They aren't blue at all...the photos are quite deceiving.
The second photo has a lot of glare cos it was taken with a iphone in bad light.
They are a cool white, Same colour as around a 6k xenon, of course not as bright but that white colour.


a 6000K xenon is blue...


Image
Image
User avatar
BR14AN
Lancer Ralliart
Lancer Ralliart
Posts: 650
Joined: Thu Jan 21, 2010 10:53 pm
Location: Cherrybrook, NSW
Contact:
Contact BR14AN

Postby BR14AN » Tue Jul 06, 2010 3:18 pm

Hey Deano,
This looks flash! Really like it.
Quick question, how flexibe is the led strip? If you try and mold it into a shape will it snap?

Thanks
User avatar
Aspired
Lancer Ralliart
Lancer Ralliart
Posts: 682
Joined: Tue Jun 23, 2009 11:11 pm
Location: Melbourne, VIC, Australia

Postby Aspired » Fri Jul 09, 2010 5:51 pm

BR14AN wrote:Hey Deano,
This looks flash! Really like it.
Quick question, how flexibe is the led strip? If you try and mold it into a shape will it snap?

Thanks

Looks pretty flexible

Image
User avatar
Deano1964
Lancer Evolution
Lancer Evolution
Posts: 773
Joined: Tue Mar 17, 2009 12:22 am
Location: Melbourne, VIC, Australia

Postby Deano1964 » Fri Jul 09, 2010 6:00 pm

BR14AN wrote:Hey Deano,
This looks flash! Really like it.
Quick question, how flexibe is the led strip? If you try and mold it into a shape will it snap?

Thanks



Very flexible, same sorta flex as a normal led strip.
The only problem i can see is if u want to flex it 90degrees...
Image
User avatar
BR14AN
Lancer Ralliart
Lancer Ralliart
Posts: 650
Joined: Thu Jan 21, 2010 10:53 pm
Location: Cherrybrook, NSW
Contact:
Contact BR14AN

Postby BR14AN » Fri Jul 09, 2010 6:38 pm

I was hoping to run it along the headlight, and it needs to be fairly flexible for that :P
User avatar
Deano1964
Lancer Evolution
Lancer Evolution
Posts: 773
Joined: Tue Mar 17, 2009 12:22 am
Location: Melbourne, VIC, Australia

Postby Deano1964 » Fri Jul 09, 2010 6:40 pm

BR14AN wrote:I was hoping to run it along the headlight, and it needs to be fairly flexible for that :P


will be more than flexible for that
Image
User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Fri Jul 16, 2010 3:56 pm

I've done the same thing as Deano on my car. Was contemplating other placements but I think 'around the headlights' is too ricey.

Image

Fail photo, but you get the idea.
They're quite visible, I set them a bit too far in so you need to be a few metres away to see them standing up. But it'll do :D
As you can see they're bright enough to significantly light up the ground.

'Side-emitting Headlight Strips' from oznium.com (neutral white).
Oh and the CCFL tubes.
And the parkers (neutral white again). :P

All 10/10 products. Not a single complaint from me. Except the CCFL's should come with 3M tape like the LED's :(

(that little black line on my radiator is electrical tape, I should get that off :P:P)
User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Fri Jul 16, 2010 4:07 pm

13.49US per foot (so I have 2 1ft strips so x2).

We did a WA group buy to save on postage cos we're poor bastards :P
User avatar
BR14AN
Lancer Ralliart
Lancer Ralliart
Posts: 650
Joined: Thu Jan 21, 2010 10:53 pm
Location: Cherrybrook, NSW
Contact:
Contact BR14AN

Postby BR14AN » Tue Jul 20, 2010 10:44 pm

Just ordered some 1foot neutral white :)
User avatar
Aspired
Lancer Ralliart
Lancer Ralliart
Posts: 682
Joined: Tue Jun 23, 2009 11:11 pm
Location: Melbourne, VIC, Australia

Postby Aspired » Tue Aug 24, 2010 10:52 pm

Mine arrived today :)
User avatar
BR14AN
Lancer Ralliart
Lancer Ralliart
Posts: 650
Joined: Thu Jan 21, 2010 10:53 pm
Location: Cherrybrook, NSW
Contact:
Contact BR14AN

Postby BR14AN » Tue Aug 24, 2010 10:54 pm

My copy of Deano's DRL
Image
User avatar
Aspired
Lancer Ralliart
Lancer Ralliart
Posts: 682
Joined: Tue Jun 23, 2009 11:11 pm
Location: Melbourne, VIC, Australia

Postby Aspired » Tue Aug 24, 2010 11:10 pm

Did you guys cut off the other end of the wire that is not connected ?
User avatar
BR14AN
Lancer Ralliart
Lancer Ralliart
Posts: 650
Joined: Thu Jan 21, 2010 10:53 pm
Location: Cherrybrook, NSW
Contact:
Contact BR14AN

Postby BR14AN » Tue Aug 24, 2010 11:15 pm

Aspired wrote:Did you guys cut off the other end of the wire that is not connected ?


Yeah just snip it off :)
Post Reply

Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 12 guests