***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

North American Lancer Recall

Not From Australia Here Is Your Section, Talk About Everything Lancer in Your Area.

Moderators: Moderators, Senior Moderators

User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

North American Lancer Recall

Postby Ozie » Tue Mar 17, 2009 9:55 pm

Recall information for our North American & Canadian Members.

Vehicle Make / Model: Model Year(s):

MITSUBISHI / LANCER 2008-2009
MITSUBISHI / OUTLANDER 2008-2009

Manufacturer: MITSUBISHI MOTORS NORTH AMERICA, INC. Mfr's Report
Date: MAR 05, 2009

NHTSA CAMPAIGN ID Number: 09V077000
N/A

NHTSA Action Number: N/A
Component: SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE
Potential Number of Units Affected: 39711

Summary:
MITSUBISHI IS RECALLING 39,711 MY 2008-2009 OUTLANDER AND LANCER VEHICLES.

INCORRECT MATERIAL COMPOSITION OF THE BRAKE BOOSTER CHECK VALVE MAY CAUSE -

THE CHECK VALVE TO STICK CLOSED WHEN THE ENGINE IS SHUT OFF.
WHEN THE VEHICLE IS RE-STARTED AND PUT INTO MOTION,
UNDER CERTAIN DRIVING CONDITIONS (VERY SLOW VEHICLE MANEUVERS), THERE MAY BE INSUFFICIENT INITIAL BRAKING ASSIST.
Consequence:
THIS MAY TEMPORARILY INCREASE THE STOPPING DISTANCE OF THE VEHICLE AND THEREFORE INCREASE THE RISK OF A CRASH.
Remedy:
DEALERS WILL REPLACE THE BRAKE BOOSTER CHECK VALVE FREE OF CHARGE.
THE RECALL IS EXPECTED TO BEGIN DURING APRIL 2009. OWNERS MAY CONTACT MITSUBISHI AT 1-800-222-0037.
Notes:
MITSUBISHI RECALL NO. SR-09-002.
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE -
AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO -
HTTP://WWW.SAFERCAR.GOV .
from 9GL.

User avatar
Panther4B11
INACTIVE Member Account
Posts: 342
Joined: Thu Dec 18, 2008 11:22 pm
Location: Brisbane, QLD, Australia

Postby Panther4B11 » Tue Mar 17, 2009 10:09 pm

Well that's quite unlucky.. Hopefully nothing like that happens in Australia.
Image

User avatar
Mizta B
Alumni
Alumni
Posts: 5867
Joined: Sun Dec 21, 2008 8:29 am
Location: Mortdale, NSW, Australia

Postby Mizta B » Wed Mar 18, 2009 12:28 am

It's a shame to hear about that
Lucky they picked it up and are correcting the fault
I agree Panther, Hope it doesn't rear it's ugly head here!
Australasian Gerbil Rearers Organisation, Official Re-Seller.
Image
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....

User avatar
Tenchi
Lancer ES/EX
Lancer ES/EX
Posts: 161
Joined: Thu Feb 26, 2009 4:26 pm
Location: Sydney, NSW, Australia

Postby Tenchi » Wed Mar 18, 2009 1:13 am

Wouldnt it be likely that we'll be affected?

Since they are made from the same factories in Japan using the same parts...
Flickr page!
Image
*OFFICIAL ClubCJ - New South Wales PHOTOGRAPHER*

dumb&

Postby dumb& » Wed Mar 18, 2009 6:36 am

I'd imagine they wouldnt vary the brake components country to country...I'd expect a letter in the mail over the coming months.

User avatar
Tarquin
Lancer Legend
Lancer Legend
Posts: 1015
Joined: Wed Sep 03, 2008 8:54 am
Location: BrisVegas, QLD, Australia

Postby Tarquin » Wed Mar 18, 2009 5:47 pm

daveee wrote:I'd imagine they wouldnt vary the brake components country to country...I'd expect a letter in the mail over the coming months.


Yeah... I was thinking the same, but the US Spec is a little different, so maybe it was just a batch of cars, rather than every single one.....

At least they're doing something about it.
- CCJ Premium Member #0015.
Image
Tarq's Paintshop

User avatar
ESsportback
INACTIVE Member Account
Posts: 37
Joined: Tue Feb 17, 2009 7:18 pm
Location: Brisbane, QLD, Australia

Postby ESsportback » Sun Mar 29, 2009 12:01 am

Whew.. Safe

Had me worried there until I checked.
Thanks for the heads up.


Return to “International”

Who is online

Users browsing this forum: No registered users and 3 guests