***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

HELP regarding HID and Relay harness!

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
milobob
Lancer Legend
Lancer Legend
Posts: 1130
Joined: Mon Aug 31, 2009 6:16 pm
Location: Melbourne

Postby milobob » Wed Jul 07, 2010 6:32 pm

I agree with blakey. Whilst it is great HIDs give lots of light, they are very very glaring. For people with eye problems (like astigmatism) - headlight glare can be very blinding.

Anyway, I have an example -

My friend has an IS200, lowered with 6000k HIDs. They are white with a slight blue tinge. People say this is the whitest but it is not. When you look at the bulbs itself from a distance they are clearly slightly bluish. But because of that to the driver it seems WHITER. If you put a 6000k HID beside an OEM HID, you can really tell how much bluer it is.

Even with the IS200 lowered, and the lights angled at the LOWEST (because he knows it can be blinding) - they are still blinding (good thing I have tint when I drive in front of him.

His personal experience: Because they are so bright, you can see more. Because they are so bright, you have to angle them lower. Because you angle them lower, you can't actually see that much further ahead. Due to the HID's light output, there is roughly 2-3x more light dispersed out from the main beam area - making street signs too bright to read.TEXT
2010 RenaultSport Megane RS250 Cup Trophee (Xenons+Leather+Front Parkers)

User avatar
dtrial
Lancer Newbie
Lancer Newbie
Posts: 52
Joined: Tue Jun 08, 2010 1:54 am
Location: Western Australia

Postby dtrial » Thu Jul 08, 2010 2:53 pm

Thank you all for the advice!
So in other words, I dont need the CAN bus ballast nor the relay harness right?
I've really wanted one of these HID for a long loong time T_T
was saving up for it atm.

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

Postby draevon » Thu Jul 08, 2010 3:05 pm

Nope ... just buy the kit as it is and you should be fine.
.
Image
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

User avatar
08VET
Lancer Newbie
Lancer Newbie
Posts: 89
Joined: Sat Oct 03, 2009 10:45 pm
Location: Gold Coast

Postby 08VET » Thu Jul 08, 2010 6:53 pm

draevon wrote:Did you get all that off of the internet, or from buying a set and having a look yourself? I read somewhere the people in red cars drive like tools ... doesn't mean it's always the case.

Aaaaaanywas, as usual this guy didn't ask anything about the legalities of installing HIDs, he was looking for specifics of what he needs. If he wants to investigate everyone's opinions on what he should do to his car, there's a million other threads with rants about HIDs.


AAHAAHAHAHAHAHAHAHAHA

xD

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Thu Jul 08, 2010 7:12 pm

draevon wrote:Did you get all that off of the internet, or from buying a set and having a look yourself? I read somewhere the people in red cars drive like tools ... doesn't mean it's always the case.

Aaaaaanywas, as usual this guy didn't ask anything about the legalities of installing HIDs, he was looking for specifics of what he needs. If he wants to investigate everyone's opinions on what he should do to his car, there's a million other threads with rants about HIDs.


no i didnt get that off the internet, i know that from my trade.( to be trade)

halogen has a completely different direction and patten light to gaseous discharge lights.

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Thu Jul 08, 2010 7:40 pm

You do need the ballasts, just not a wiring harness.
If you buy a kit everything you need will be there (probably with generic instructions too) :)

The ballasts are required as they generate the ~23,000 volts required to ignite the gas inside the HID and then after that they regulate the power.. It takes some time for the bulbs to reach 100% light output also, so rapidly turning them off/on is not good :)

And lets not turn this thread into an "I HATE HID'S!!111oneoneoen" thread, the original topic was about asking a question how they work.
I understand that you want to voice concern about legality or personal dislike towards HID's and that has been done already, so lets keep it on topic.
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
dtrial
Lancer Newbie
Lancer Newbie
Posts: 52
Joined: Tue Jun 08, 2010 1:54 am
Location: Western Australia

Postby dtrial » Fri Jul 09, 2010 8:19 pm

Got it, Thanks all for the help!!


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 20 guests