***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Tint Tail Lights

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

BDR-BOY
Lancer Newbie
Lancer Newbie
Posts: 21
Joined: Mon May 10, 2010 5:48 pm
Location: bluemountains

Tint Tail Lights

Postby BDR-BOY » Thu Jun 24, 2010 1:23 pm

Sorry if anyone has covered this but....


Im looking to tint my tail lights the LED tail lights look really good but a few people around the blue mountains have them so was looking to go a bit different and just tint them with either a spry or a film.

Have looked up spray and think that is the way to go as you can be as dark or light as you want per coat. (dont want to dark i have a effect grey lancer so looking to blend them in more like the smoked LED's)

just windering if any one has done it and how hard etc it is.

Thanks
Ed

smithsy
Lancer VR/GT
Lancer VR/GT
Posts: 252
Joined: Wed Jan 27, 2010 8:54 am
Location: West side

Postby smithsy » Thu Jun 24, 2010 1:27 pm

It's just like spray painting, piece of cake.

Just make sure to prepare the surface as per the instructions on the can on Night Shade.

Also keep in mind that spraying the tail lights is illegal and a defectable offence. It could also have insurance repercussions in the event of a rear end crash.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Jun 24, 2010 1:39 pm

I've sprayed my signal indicators and the high stop lamp using Nightshades. Easily done as smithsy pointed out. And most importantly put in a dry warm place to set. Doing it in cold weather will spoil it.

Also my suggestion is to do nice thin coats. Spray, set and see. You'd be amaze how dark 4 coats will become. Just do them one coat at a time. If you do less coats, you will get a grey-ish finish.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

BDR-BOY
Lancer Newbie
Lancer Newbie
Posts: 21
Joined: Mon May 10, 2010 5:48 pm
Location: bluemountains

Postby BDR-BOY » Thu Jun 24, 2010 1:51 pm

yeah im not after black as such just a light coat to dull them,

as i think that the stock 2008 red tail lights look a bit to red next to the grey unless someone knows someone with the black tail lights that want to swap for the red ones lol

dont like my chances but worth a shot.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Jun 24, 2010 1:55 pm

Very unlikely anyone will want the Red tail lamps except with those who have Red cars.

Most people with red tail lamps either buy the LED ones or clear ones.

I constantly offer old folks I see driving new VRs or ESs A$100 to switch to my Red ones and none of them take up my offer... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

BDR-BOY
Lancer Newbie
Lancer Newbie
Posts: 21
Joined: Mon May 10, 2010 5:48 pm
Location: bluemountains

Postby BDR-BOY » Thu Jun 24, 2010 2:07 pm

ha ha ha ha yeah dreaming i no lol

But if any one does want to change im happy to but i like the LED's but as i said a few lancers around the mountains have them and tinting prob a good way and hella cheap to do.

but if i decided soon to get the LED's i wil contact u ofey lol
what are the clear ones?

User avatar
DORA_ANNE
Lancer MASTER
Lancer MASTER
Posts: 2253
Joined: Fri Jan 01, 2010 8:07 pm
Location: Northern Rivers NSW AUSTRALIA

Postby DORA_ANNE » Thu Jun 24, 2010 5:29 pm

Edward I came across this site called " HEADLIGHT ARMOR " They have a Tinted Material with a adhesive backing that you apply to your lights , I Think you can do your taillights with this .... If you Google the site you may read up on the product ,

I don't know if it is any good but I Thought this might help . I Would of put the link up for you but Iam not sure how to do that yet :roll:
Image
Angels Are Sometimes Disguised As Friends

BDR-BOY
Lancer Newbie
Lancer Newbie
Posts: 21
Joined: Mon May 10, 2010 5:48 pm
Location: bluemountains

Postby BDR-BOY » Fri Jun 25, 2010 9:36 am

Cool Thanks dora Big help but now im being told by my partner to think about the LED's because they look better then just tint and i might regret it later and waste money lol

But will have a look at that site atleast i could rip it off if i dont like it..

User avatar
DORA_ANNE
Lancer MASTER
Lancer MASTER
Posts: 2253
Joined: Fri Jan 01, 2010 8:07 pm
Location: Northern Rivers NSW AUSTRALIA

Postby DORA_ANNE » Fri Jun 25, 2010 11:09 am

Edward I Do agree with your partner , As I Have the LED Taillights "smoked ones" & They look heaps better ,

I Don't Think you will regret getting them if you do decide on Them .

Cheers Doreen :)
Image

Angels Are Sometimes Disguised As Friends


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 8 guests