Hey
im a newbie to this forum love all he info you guys talk about and the CJ series... anyways to my question
I have a lancer 08 vrx with a sunroof and i ony have the 2 front reading lights above the front seats, now at night the rear seats are awfully dark and when you have to tend to a 1yr old in a baby seat it would be a bit easier sometimes with a little light, im not sure if people without a sunroof have a light in the middle of the roof, or not,is this a problem for anyone else and if so how did yous get light there ?
I was thinking of buying the lights that go above the rear doors like to comodores have and wire them in wi.,th the interrier light loom, but i wouldnt really know where to begin, maybe there is a easier way
cheers Martin.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Dark interrier Lighting
Moderators: Moderators, Senior Moderators
-
- INACTIVE Member Account
- Posts: 6
- Joined: Thu Feb 18, 2010 9:22 pm
- Location: Sydney, Australia
http://clubcj.net/viewtopic.php?t=3488& ... rior+light
Above is a link where I wanted to do the same.
Have a read as it will answer a lot of your questions
Above is a link where I wanted to do the same.
Have a read as it will answer a lot of your questions
-
- INACTIVE Member Account
- Posts: 6
- Joined: Thu Feb 18, 2010 9:22 pm
- Location: Sydney, Australia
Martin I have actually to fit an original Lancer interior light.
I bought one from the wreckers with the wire loom.
The original light screws to the roof rails. We can not do that because the sunroof is in the way.
I plan to drop the roof lining down then cut a hole for the light. I will then make a plate that will sit on the inside of the roof lining that i can screw the light to.
I have been slack and not done this yet.
One issue I have not been able to find where the wire loom plugs into.
If I can not find it I will just cut into the map lights.
If you need more help just ask. If you email your phone number I can ring you and discuss if you wish.
I bought one from the wreckers with the wire loom.
The original light screws to the roof rails. We can not do that because the sunroof is in the way.
I plan to drop the roof lining down then cut a hole for the light. I will then make a plate that will sit on the inside of the roof lining that i can screw the light to.
I have been slack and not done this yet.
One issue I have not been able to find where the wire loom plugs into.
If I can not find it I will just cut into the map lights.
If you need more help just ask. If you email your phone number I can ring you and discuss if you wish.
The wiring loom for dome light comes from the Passenger side A pillar, Not too sure on the colours of the wires but if I ever take my roof off again I'll make a note of them.
I'd also recommend some SMD LED map lights, Lancervr has some in his car and when they're on it looks like it's daytime in the car, they're amazing!!
I'd also recommend some SMD LED map lights, Lancervr has some in his car and when they're on it looks like it's daytime in the car, they're amazing!!
Four wheels move the body, two wheels move the soul.
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster
haha yea my map lights are awesome lol bright enough that i dont need any footwell lights lights em up as well.... and graham dont forget about about my reverse bulbs.... brightest in clubcj lol.....
u should try out some 8 smd leds for ure map lights cuz the light should travel to back seats as well... i will try to get you some pics mate when i m free later when it turns darker....
u should try out some 8 smd leds for ure map lights cuz the light should travel to back seats as well... i will try to get you some pics mate when i m free later when it turns darker....
-
- INACTIVE Member Account
- Posts: 6
- Joined: Thu Feb 18, 2010 9:22 pm
- Location: Sydney, Australia
um i bought them in singapore recently when i went there for an internship.... pity you didnt ask sooner lol could have gotten a set for you as well... helped Ral1rt get some and he loves them but i reckon u can get em from maybe http://www.brightlightautoparts.com/LED ... lobes.html
or i could get in touch with the guy i bought it off in singapore to send you some....
or i could get in touch with the guy i bought it off in singapore to send you some....
-
- INACTIVE Member Account
- Posts: 6
- Joined: Thu Feb 18, 2010 9:22 pm
- Location: Sydney, Australia
actually the bulb you would be looking for would be a 31mm festoon connector and i got a 8 smd dome light 31mm festoon from my guy in singapore..... so yeah i reckon that would be the best if you need it brighter 10smd would be the way to go but i reckon 8 smd is the brightest to go for cuz anything more would be too bright and glaring.... um this is the stuff my guy sells... you can get a good gauge of what you need and want from here....
http://www.DJenesis.com/led/DJenesis1.pdf
http://www.DJenesis.com/led/DJenesis1.pdf
-
- INACTIVE Member Account
- Posts: 22
- Joined: Wed Feb 24, 2010 2:28 pm
- Location: West Melbourne, VIC
Hes back from Singapore now. These guys are really good, ive brought some LED's from them:
http://www.brightlightautoparts.com/LED ... lobes.html
http://www.brightlightautoparts.com/LED ... lobes.html
actually i made still be able to source it from singapore but would need a good set of numbers for it to be viable..... if there are others who want it they should say so..... so i can get in touch with him to get a good price and cheaper postage.... and if there are many that would turn it into a group buy i m guessing of which i would require the admins' approval...
Who is online
Users browsing this forum: No registered users and 13 guests