***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

COVID19 Lancer Prep

Servicing, Oil Changes, Fluids & Much More.

Moderators: Moderators, Senior Moderators

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: COVID19 Lancer Prep

Postby Lancer1993 » Thu Apr 09, 2020 6:45 pm

The key for me is the buy cheap supplies of timber or steel which I normally get from an Op Shop for next to nothing.

Today I made a mount for my belt sander turning it into a mini bench sander!
Used bit I had sitting around and works, need to make a few changes but will come in handy for some of my sanding needs.

Also ordered a can of paint for my brakes, had to choose click and collect, probably pickup up tomorrow with zero contact. Also getting some gloves.
Image
My rides CJ VRX - CC coupe

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: COVID19 Lancer Prep

Postby bumblebee » Thu Apr 09, 2020 9:01 pm

Don't forget a mask if it is spray paint

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: COVID19 Lancer Prep

Postby bumblebee » Sun Apr 12, 2020 3:38 pm

Public fuel prices still fall
Yay
E10- United 24- 95.9 C/L
98 - United 24 - $1.19c/l
98- BP- $1.24 C/L

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: COVID19 Lancer Prep

Postby Lancer1993 » Mon Apr 13, 2020 7:24 am

Here around Caloundra its generally just above $1 but there are some now below that mark... great for those who have work and can drive :(
Image
My rides CJ VRX - CC coupe

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: COVID19 Lancer Prep

Postby bumblebee » Mon Apr 13, 2020 8:05 am


User avatar
Nat
Lancer Newbie
Lancer Newbie
Posts: 25
Joined: Mon Jan 21, 2019 7:26 pm
Location: QLD

Re: COVID19 Lancer Prep

Postby Nat » Mon Apr 13, 2020 3:07 pm

Filled up at my local BP today with the usual BP Ultimate, the price was $1.19. Alot nicer than the $1.60ish I was paying 6 months ago.

fearfulmaster2
Lancer Newbie
Lancer Newbie
Posts: 42
Joined: Mon Aug 06, 2018 9:40 am

Re: COVID19 Lancer Prep

Postby fearfulmaster2 » Mon Apr 13, 2020 4:44 pm

If you are interested in the petrol price cycle, the following is a must:

First chart, green line will provide an indication of which way wholesale price is going.
https://aip.com.au/pricing/internationa ... rket-watch

The table will give you an ideal if the price has reach the bottom of the cycle. In Syd, at bottom of cycle, price will be slightly lower than the TGP and about the TGP for expensive area.
https://aip.com.au/pricing/terminal-gate-prices

This will show whether we are at the bottom of the curve yet.
https://www.accc.gov.au/consumers/petro ... ice-cycles

At retail level:
In NSW:
http://fuelcheck.nsw.gov.au/app

In WA:
http://fuelwatch.wa.gov.au/

Not sure about other states.

So at the moment for Syd, the bottom of the cycle SHOULD be around 85c. But retailers may hold on to more margin due to reduced demand. I also noticed an (sometimes significantly) increased spread between e10 and higher grades, maybe that is how they want to claw back lost revenue.

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: COVID19 Lancer Prep

Postby bumblebee » Mon Apr 13, 2020 5:12 pm

If you install "fuel maps Australia"
Down the bottom of the screen it says
Graphs

Click that

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: COVID19 Lancer Prep

Postby bumblebee » Mon Apr 13, 2020 9:18 pm

http://www.speedhunters.com/2020/04/700 ... eet-build/

This is very cool
Massive 82mm TB on it
I'd love to see the inlet manifold where it bolts up to TB.

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: COVID19 Lancer Prep

Postby bumblebee » Fri Apr 24, 2020 8:39 pm

Here ya go team
If you really want a C19 project to do this may interest you.

You only need to buy one part,a brass pieces

Have a good look thru the photo's and get a good understanding of what your doing First before you rip the car to bits
Remember , if you get this wrong there is a good chance you can cook your motor with fluid leaks or air bubbles in the lines.
If your not confident in doing it, get your trusted Mechanic to.do it for you

The benefit of.doing this is drastically reduced heat to the throttle body.

http://imgur.com/a/1aFKlqy

Enjoy

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: COVID19 Lancer Prep

Postby bumblebee » Sun Apr 26, 2020 5:45 pm

ABC News: The Coronavirus tracing app has been released. Here's what it looks like and what it wants to do.
https://www.abc.net.au/news/2020-04-26/ ... d/12186068

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: COVID19 Lancer Prep

Postby Lancer1993 » Mon Apr 27, 2020 8:24 am

Got the app last night, not that it will see much use until later in the week when I go to collect the shopping.
Image
My rides CJ VRX - CC coupe


Return to “Maintenance”

Who is online

Users browsing this forum: No registered users and 41 guests