So I've had this issue intermittently since I've had the car
But more so lately
When up shifting into second it makes a sort of scraping noise kind of like scraping a rock across concreteand the gear stick wants to stop. And the passengers Hear it. It doesn't do It once the car has been run for about half an hour and doesn't while downshifting. Still does it no matter how slow I change. And doesn't do it if the car isn't moving
Going to take it in for warranty i think. But where do I start making suggestions because it probably won't do it when I take it there for them to look at it, is it possibly my driving habits also?
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
2nd gear scraping
Moderators: Moderators, Senior Moderators
- wolfeey152
- Lancer ES/EX
- Posts: 127
- Joined: Thu Jun 04, 2015 7:16 pm
- Location: Erskine park,Australia
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
- wolfeey152
- Lancer ES/EX
- Posts: 127
- Joined: Thu Jun 04, 2015 7:16 pm
- Location: Erskine park,Australia
Alright that's what I'll do. If it's a synchro will they just replace that or will they put a new tranny in?
I might also add. There's no noise from the tranny itself. Just the stick as well as the feeling. And also that rarely when shifting out of first. It kind of pops out as I pull on it a little. Should I also look at my clutch adjustment? And linkages
I might also add. There's no noise from the tranny itself. Just the stick as well as the feeling. And also that rarely when shifting out of first. It kind of pops out as I pull on it a little. Should I also look at my clutch adjustment? And linkages
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Just thinking it could be in the linkage under the gear lever, which is a relatively easy check and fix as just need to take out the center console to check it.
In my old coupe I was having gear change issues, got so bad I could not select 1st, thought I was up for a big expensive GB repair bill. Turned out a couple of bushes in the linkage were worn.
That said it was 15 year old at the time so many gear changes and loads older than you CJ.
Just tell them what is happening and they could check it out under warranty.
In my old coupe I was having gear change issues, got so bad I could not select 1st, thought I was up for a big expensive GB repair bill. Turned out a couple of bushes in the linkage were worn.
That said it was 15 year old at the time so many gear changes and loads older than you CJ.
Just tell them what is happening and they could check it out under warranty.
- wolfeey152
- Lancer ES/EX
- Posts: 127
- Joined: Thu Jun 04, 2015 7:16 pm
- Location: Erskine park,Australia
*update* so ive had the dealer look over the car properly and they couldn't recreate it. But I've managed to capture the noise on video it's normally that noise in the video with some slight feedback through the stick like it's hitting a shift fork or the guide walls or such. You can hear the noise it makes pretty clear. What do you guys think?
https://youtu.be/KXvoHVw6ptI
https://youtu.be/KXvoHVw6ptI
- wolfeey152
- Lancer ES/EX
- Posts: 127
- Joined: Thu Jun 04, 2015 7:16 pm
- Location: Erskine park,Australia
XTPN wrote:Sounds normal to me
Well yeah I keep thinking it may just be normal.it's like a big clunk with feedback through the stick l. But only on second? And not every shift either? That's why I worry Does your cj also get that same tapping or whatever you wanna call it as well as the stick feeling as though its rubbing against something?
sounds like grinding to me.
Does it happen at certain revs ? is the car cold when it happens ? does it do it when its warmed up ?
and how much kms on the car ?
Does it happen at certain revs ? is the car cold when it happens ? does it do it when its warmed up ?
and how much kms on the car ?
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85
FULL EVO X TURBO SETUP
APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |
TUNED BY BEEBLE | EXEDY H/D CLUTCH
BC RACING BR COILOVERS
FULL EVO X TURBO SETUP
APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |
TUNED BY BEEBLE | EXEDY H/D CLUTCH
BC RACING BR COILOVERS
- wolfeey152
- Lancer ES/EX
- Posts: 127
- Joined: Thu Jun 04, 2015 7:16 pm
- Location: Erskine park,Australia
Best answer anyone is going to give you.
Go back to Mitsubishi and they will fix anything wrong with it WARRANTY LIFE BABY
Let us know what the issue was !
Go back to Mitsubishi and they will fix anything wrong with it WARRANTY LIFE BABY
Let us know what the issue was !
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85
FULL EVO X TURBO SETUP
APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |
TUNED BY BEEBLE | EXEDY H/D CLUTCH
BC RACING BR COILOVERS
FULL EVO X TURBO SETUP
APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |
TUNED BY BEEBLE | EXEDY H/D CLUTCH
BC RACING BR COILOVERS
- wolfeey152
- Lancer ES/EX
- Posts: 127
- Joined: Thu Jun 04, 2015 7:16 pm
- Location: Erskine park,Australia
Go back again and tell them to drive it again. If it doesnt happen, you drive them. Go to a different dealer
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85
FULL EVO X TURBO SETUP
APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |
TUNED BY BEEBLE | EXEDY H/D CLUTCH
BC RACING BR COILOVERS
FULL EVO X TURBO SETUP
APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |
TUNED BY BEEBLE | EXEDY H/D CLUTCH
BC RACING BR COILOVERS
- wolfeey152
- Lancer ES/EX
- Posts: 127
- Joined: Thu Jun 04, 2015 7:16 pm
- Location: Erskine park,Australia
Who is online
Users browsing this forum: No registered users and 25 guests