***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Engine start
Moderators: Moderators, Senior Moderators
-
- Lancer Newbie
- Posts: 31
- Joined: Thu Apr 15, 2010 5:04 pm
- Location: Torquay, Victoria , Australia
Engine start
Has anyone had any trouble with there's not starting? Example, it will crank for two sec then die? This has happened so many times...
- Frazza
- Lancer Ralliart
- Posts: 557
- Joined: Wed Aug 05, 2009 8:50 am
- Location: Berrinba, Brisbane
- Contact:
age69er43 wrote:Nah its not the battery, I tested it
When you tested it how many volts did it have, if it dropped a cell it might show charge but not enough to crank
MY10 Golf R | 5 Door | Rising Blue Metallic | DSG | MDI | Black 19" Talladega | Motorsport Seats | Bluetooth | Sunroof | RNS510 + DYNAUDIO 300W
- driftnut((
- Lancer Evolution
- Posts: 950
- Joined: Sun Oct 11, 2009 12:05 pm
- Location: central coast Australia
- exaltd
- Lancer Evolution
- Posts: 796
- Joined: Thu Aug 06, 2009 12:19 pm
- Location: Melbourne, VIC, Australia
Yes. Could be either faulty battery, weak battery or dead starter motor. Try all those first.
Testing it, should have no less than 9V on start up.... minimal high 8's with weak and long crank. Optimal around 10-11V.
Then test each individual cell for a charge - 2V+ in each should be (6 cells).
Then check the starter motor for charge.
Failing all this, check for leads and anything that could be out of the ordinary. If everything fails, call your mechanic
Hope that helps.
Testing it, should have no less than 9V on start up.... minimal high 8's with weak and long crank. Optimal around 10-11V.
Then test each individual cell for a charge - 2V+ in each should be (6 cells).
Then check the starter motor for charge.
Failing all this, check for leads and anything that could be out of the ordinary. If everything fails, call your mechanic
Hope that helps.
Who is online
Users browsing this forum: No registered users and 20 guests