***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* Bodykits & Add on Parts
Moderator: Senior Moderators
- Bandit
- Lancer Legend
- Posts: 1170
- Joined: Tue Dec 09, 2008 8:56 am
- Location: The People's Republic of Campbelltown
Mine has two screws and double sided body builder 3M tape under it with sikaflex on the sides so water doesn't get in.
It's been scraped along the bottom a couple of times getting out of driveways etc. and doesn't look like coming loose.
The screws are on the underside, so if you do ever want to take it off, the holes won't be visible.
It's been scraped along the bottom a couple of times getting out of driveways etc. and doesn't look like coming loose.
The screws are on the underside, so if you do ever want to take it off, the holes won't be visible.
ClubCJ's first Sportback
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
There is no choice with the C-Lip, you have to put the 2 countersink screws in to retain it's position.
my brother lost his c-lip on the weekend as he refused to drill holes too. It was held on by 3M tape and Stikaflex and it still came out.
my brother lost his c-lip on the weekend as he refused to drill holes too. It was held on by 3M tape and Stikaflex and it still came out.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- JazzyB
- Lancer Ralliart
- Posts: 731
- Joined: Thu Feb 12, 2009 2:42 pm
- Location: Melbourne, VIC, Australia
Lol - I wasn't thinking and put 5 screws, one in middle on top and one on each of the side walls where it curls-up the grill a bit...
The one here I'm pretty sure IS the one from ebay, you just decide how to mount it yourself I think, it's provided with 2 holes on the bottom so if you don't want holes in the top you can just use sikaflex etc.
Lpy - we shipped over a 'tool measuring machine' for the CNC's - big, heavy, cast iron base... (plus 2 boxes of tool holders, a.k.a - big industrial drill-chucks )
The one here I'm pretty sure IS the one from ebay, you just decide how to mount it yourself I think, it's provided with 2 holes on the bottom so if you don't want holes in the top you can just use sikaflex etc.
Lpy - we shipped over a 'tool measuring machine' for the CNC's - big, heavy, cast iron base... (plus 2 boxes of tool holders, a.k.a - big industrial drill-chucks )
- exaltd
- Lancer Evolution
- Posts: 796
- Joined: Thu Aug 06, 2009 12:19 pm
- Location: Melbourne, VIC, Australia
Hi Ofey,
Just want to clarify, how big tips can the rear diffuser (HOS) dual and single fit? Doesn't look very big.... would it fit say something like the GReddy exhaust from the group buy? (4in. tip))
Really interested in getting this rear diffuser (only one that seems to fit a nice aftermarket exhaust (dual or single) ) in the next yr so starting to plan now.
Thanks.
-EXALTD-
Just want to clarify, how big tips can the rear diffuser (HOS) dual and single fit? Doesn't look very big.... would it fit say something like the GReddy exhaust from the group buy? (4in. tip))
Really interested in getting this rear diffuser (only one that seems to fit a nice aftermarket exhaust (dual or single) ) in the next yr so starting to plan now.
Thanks.
-EXALTD-
- Aspired
- Lancer Ralliart
- Posts: 682
- Joined: Tue Jun 23, 2009 11:11 pm
- Location: Melbourne, VIC, Australia
Ofey, rexpeed have a carbon fibre lip spoiler and their radiator panael looks nice aswell.
http://www.rexpeed.net/new2007/product_ ... serial=182
http://www.rexpeed.net/new2007/product_ ... serial=197
http://www.rexpeed.net/new2007/product_ ... serial=158
Have you dealt with them ?
Or how about these guys ?
http://buddyclub.en.alibaba.com/product ... Evo_X.html
http://www.rexpeed.net/new2007/product_ ... serial=182
http://www.rexpeed.net/new2007/product_ ... serial=197
http://www.rexpeed.net/new2007/product_ ... serial=158
Have you dealt with them ?
Or how about these guys ?
http://buddyclub.en.alibaba.com/product ... Evo_X.html
- Josh_Emerton
- Lancer MASTER
- Posts: 1920
- Joined: Fri Oct 17, 2008 10:49 pm
- Location: Cairns, QLD, Australia
Hey Ofey - the one you have picced as the GT Front Lip Kit from HOS is very different to the ones in the 'other views of GT kit' pics - the ones there are awful, look like a GT-R lol.
Can I get a pricing on the
-HOS GT Dual Exhaust rear diffuser
-HOS GT Front lip kit, but the one in the first pic lol, not the 'other views' pics.
-the 3 piece HOS rear wing - (im only semi interested in that though, I'm leaning X-Factor.)
Also - Where can you get that sorta Night Rider hood?
And I'm still working on funds for the LED tail lights, I'm assuming you still have 3 or 4 sets lol
Can I get a pricing on the
-HOS GT Dual Exhaust rear diffuser
-HOS GT Front lip kit, but the one in the first pic lol, not the 'other views' pics.
-the 3 piece HOS rear wing - (im only semi interested in that though, I'm leaning X-Factor.)
Also - Where can you get that sorta Night Rider hood?
And I'm still working on funds for the LED tail lights, I'm assuming you still have 3 or 4 sets lol
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
For everyone's info: My lower center lip is held on by 3M tape and 2 self tapping screws on the bottom.
--
Josh, work on the pics I provided in this thread. The other one is another kit which they "canned".
The prices are as stated on the thread. That Knight rider hood I'll need to get you a quote for.
Bear in mind all of these parts are FRP material and fitment is excellent but is only primed. Not painted.
--
I've heard of Rexspeed and also of BDK Carbon and have attempted to deal with both of them. Rexspeed doesn't write back, much like RRM and BDK is a front for a factory which i deal with directly instead.
--
Josh, work on the pics I provided in this thread. The other one is another kit which they "canned".
The prices are as stated on the thread. That Knight rider hood I'll need to get you a quote for.
Bear in mind all of these parts are FRP material and fitment is excellent but is only primed. Not painted.
--
I've heard of Rexspeed and also of BDK Carbon and have attempted to deal with both of them. Rexspeed doesn't write back, much like RRM and BDK is a front for a factory which i deal with directly instead.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- Josh_Emerton
- Lancer MASTER
- Posts: 1920
- Joined: Fri Oct 17, 2008 10:49 pm
- Location: Cairns, QLD, Australia
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 15 guests