*CLOSED* UR Braces - ClubCJ GBuy Nov'10 R5

[SIR-VRX]

ofey, is there any chance of a second round of UR stuff in the near future? I have noticed a lot of interest from others wanting some too, AND I would like some more!!

[infinite]

Yeah if we did a second round I'd definitely grab some more bars

[ofey]

Both of you!!

If you wanted more why didn't you just buy the lot in the first place like exaltd? A complete set for the CJ Lancer was only A$800 for the parts. Good value don't you think for over A$ 1414.00 RRP worth of parts. Even with shipping exaltd ended up paying A$1000. Good value I reckon. If you organise another buy, you're paying for worthless shipping.

I surely can do it again if necessary.

[SIR-VRX]

I couldn't afford it all at such short notice ofey! From order to payment was only a week!

I only want front and rear upper braces next!

[ofey]

Blanka is considering getting his Tein Coil overs from the same guy so I might tie your purchases together.

[tadz0rz]

Ill transfer the money for you tomorrow ofey, CANT WAIT FOR THIS!!!

[tadz0rz]

sorry for the double post but, ofey, can i pick this up from you sometime on the weekend if your free? Thanks for organising this, +1!

[exaltd]

LOL..... Ofey, do you really want people owing that much money like I owe you right now?!? LOL - i reckon now that I did a bit of overkill, but I guess it'll come in handy when tracking It must really be that good

Also Sir-VRX, how did you install these? What tools did you use? Or did you get it professionally done?

Thanks all

-EXALTD-

[SIR-VRX]

I am going to write up a DIY for it. just waiting on Jamez707 for the pictures he took.

I installed mine myself, and also jamez707 came around and we installed his too.

It's not hard to DIY, but you will need a decent socket set, and one with deep sockets. And I would recommend getting it done professionally if you don't know what you are doing, especially if you are getting the anti-roll bar. It could be under tension and you might not get it back into alignment properly. Depends on how you are doing it ie on stands, ramp or hoist.

I used ramps, drove the front or rear up and when doing the front lower I supported the K-Frame with a jack, as it holds a fair weight and I didn't want it to come down when I undid the bolts.

Pretty easy mate, but I have the right tools and know how. If you are confident, sure DIY it, don't be scared! But if you have no clue at all, I recommend at least getting a mate who has an idea at the least.

Hope that helps.

Or you can just wait for the DIY!

[ofey]

It's a good point exaltd. I might have to resell your parts on to other people since I'm now out of pocket by A$800!? which is not a small amount by any stretch of the imagination

[tadz0rz]

Hey ofey, if these parts are in your hands by sunday, could you bring them along to the north side meet if you can make it?

[ofey]

Right with so many people PM-ing me and making their intentions known, I will offer a rapid Round 2 on these.

Let me know what you boys want and I'll update the first post:

PRICING
Rear Anti-roll/Sway Bar UR-AR23-136 (3.8KG)= A$240ea
Front Strut Bar UR-TW2-440 (2.0KG)= A$110ea
Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea
Front Lower Bar UR-LA4-442 (1.8KG)= A$120ea
REAR LOWER BAR "PAIR" (4 Point) UR-RL4-444P (0.8kg)= A$110ea
Rear Lower Bar UR-RL2-447 (1.2KG)= A$100ea

I should clarify though that I will need enough numbers to make this worthwhile... .

[SIR-VRX]

I'd like:

1x Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea

Thanks ofey!

[Paggsy]

Okay I'm on your side Ofey... It means baked beans and 2 mins noodles but I'm in lol

Front Lower Bar UR-LA4-442 (1.8KG)= A$120ea
REAR LOWER BAR "PAIR" (4 Point) UR-RL4-444P (0.8kg)= A$110ea

I'd love the Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea but I just can't stretch it

Thanks champ

[tadz0rz]

Adrian, with the rear strut tower bar, we have to modify our pannels in our boots to make them fit correct?