***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Possible new Number Plates Law for NSW

Everything Lancer Related + News & Current Affairs.

Moderators: Moderators, Senior Moderators

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Possible new Number Plates Law for NSW

Postby Chubb » Wed May 26, 2010 9:28 am

Just dropped my car off this morning to get a service at the dealer and he informed me that the RTA have now changed their rules regarding number plate positions. If you do not already know I have my plate mounted to the left of my lower grill. The head mechanic this morning informed me that if my plate was not in the manufactures original position that he could not pass my car for rego, and if I was caught on the road I will be up for $220 fine.

I have not had time to actually find this new law on the web but I was told the RTA and police are looking at being very hard on this in the future.

<RANT>
You would think their time would be better spent getting the unsafe s**t boxes of the road, but I guess a number plate that is not in the manufactures position is a bigger threat to other roads users ????? WTF.

</RANT>

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

Postby draevon » Wed May 26, 2010 10:27 am

I guess you have to draw the line somewhere. I've seen people with their numberplates on their dashboard because they don't want to mess up the front of their cars. Probably works out a lot easier to force people to just leave them where they are.

That said, I sure hope that doesn't spread to QLD :)
.
Image
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Wed May 26, 2010 10:36 am

that will P off alot of the VL turbo (and some non turbo guys)

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Wed May 26, 2010 10:43 am

Does that therefore include those with side mounted plates (i.e. the JDM Evo position)?
Image

"A man who stands for nothing, falls for anything."

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Wed May 26, 2010 10:54 am

He said it had to be mounted where the dealer fitted the plate, so evo 8 and 9 can be side mounted because the dealers fitted it there standard. I guess good luck to people with modded front bumpers who can not mount the plate where it was at stock.

Once again I ask what is the issue with the old law must be visible from a 45 degree angle 20meters from the front.

bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Wed May 26, 2010 10:58 am

if its gona quote that the plate must be where the dealer fitted it, could get smart, and order the EVO side mount and get the dealer to fit it for you :P :twisted:

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Wed May 26, 2010 10:59 am

Nathan just use double tape to get through the inspection and then fit it back afterwards.

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Wed May 26, 2010 11:23 am

Yeah well being a new car it does not have to be inspected for 3 years and if I get caught on the road I will play dumb and say I was un-aware of the new rules and have fitted the plate as per the old rules. Might get out of it.

User avatar
WASABI
INACTIVE Member Account
Posts: 43
Joined: Tue Apr 27, 2010 3:31 pm
Location: Sydney, Australia

Postby WASABI » Wed May 26, 2010 12:27 pm

That's interesting, considering the front plates are generally where you get the most flexibility... Have seen MX-5's with stickers or magnetic number plates.

Plus, cameras take the image from the rear anyway if I'm not mistaken... Otherwise motor bikes would need to have a front plate.

Anyway, it's all a ploy to screw people out of more money IMO... Without a doubt, NSW is the Nanny state in Australia... Too many speed cameras, red light cameras, unsigned "safety cameras"... Not to mention they rip us all hard on rego costs & custom plates...

User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Wed May 26, 2010 12:29 pm

bd-850 wrote:if its gona quote that the plate must be where the dealer fitted it, could get smart, and order the EVO side mount and get the dealer to fit it for you :P :twisted:

This.


And you say they should concentrate on getting s***boxes off the road... But in many ways laws like this exist so they have an initial reason to pull over the s***box in the first place and inspect it.
Its not fair on us though. Haven't seen anybody moving their plate to try and hide it, just for aesthetic reasons.

WA doesn't have compulsory inspections though unless you get yellow stickered...

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Wed May 26, 2010 12:35 pm

Yeah well I just paid $110 for a set of custom plates that will now cost me $90 a year and now they tell me where I have to put them.

User avatar
Deej
Lancer Newbie
Lancer Newbie
Posts: 24
Joined: Fri Aug 28, 2009 3:07 pm
Location: Brisbane, Australia

Postby Deej » Wed May 26, 2010 12:52 pm

Just got this from the RTA website road users handbook. Section 6 page 156. Doesnt seem to mention where is needs to be placed, seems to be as long as it is within the mentioned parameters you should be right...My guess is that as long as this is from the official RTA publication, they cannot pick you up for having a number plate moved within legal criteria.

http://www.rta.nsw.gov.au/licensing/downloads/road_users_handbook.pdf

Number plates
Number plates on the vehicle you drive or own must be:
• Issued by the RTA.
• Able to be seen and read clearly from anywhere within a 45 degree arc of the vehicle’s centreline, at a distance of at least 20 metres (see diagrams on the right). That means they cannot be hidden by anything (such as a tow bar or anything being carried). If you carry bicycles on a bike rack which hides the rear number plate on your car in any way, you must either move the rear number plate to a position where it can be clearly seen or buy a special bike rack number plate to attach to the bike rack. A bike rack number plate has the same number as your car’s number plates, and can be ordered from motor registries
or by calling 13 22 13.
• Clearly readable – not dirty, worn or damaged.
• Given back to the RTA after the registration has expired.
The rear number plate must have a light so that it is clearly visible at night.
It is an offence to:
• Alter number plates in any way.
• Attach a number plate to any vehicle other than the one to which it is RTA registered.
• Use a number plate cover that is not flat, clear and untinted (number plate covers
which have lines across them are not considered to be clear).

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Thu May 27, 2010 11:00 pm

Outta interest what happens at an inspection in 3 years? Will they note it down?
Image



"A man who stands for nothing, falls for anything."

User avatar
DJBOOBY
Lancer ES/EX
Lancer ES/EX
Posts: 119
Joined: Sat Oct 03, 2009 8:10 pm
Location: Tumut NSW Australia

Postby DJBOOBY » Fri May 28, 2010 6:04 am

Yeah well I just paid $110 for a set of custom plates that will now cost me $90 a year and now they tell me where I have to put them.

rta was having a discount if you orded plates online and not a 100% but no on going fees
restilled my ute plates to go on my lancer cost me $150 saving $75 ($220)
you had to do it on line to get discount
Image

User avatar
driftnut((
Lancer Evolution
Lancer Evolution
Posts: 950
Joined: Sun Oct 11, 2009 12:05 pm
Location: central coast Australia

Postby driftnut(( » Sat May 29, 2010 6:58 pm

ok well the cops showed some muscle last night at our local meeting point they went over my car with a fine tooth combe, my plate is now on the lower grille and they didn't say sh!t about it so dunno if they just didn't know about it yet cause being on my green p's they would pick on everything i mean they even searched my car, too bad for them there was nothing to find and the old cop who has puled me over " for 3 RBT'S" (excuse) didn't say anything either hhhmmm
Image

driftnut((.. ClubCJ's first RX TURBO, Merlinised, K&N pod 18" KING wheels, BC coil overs, Alpine/Pioneer system, Short shifter, Cat back system, Evo x turbo system, ralliart injectors & pump


Return to “ClubCJ Talk”

Who is online

Users browsing this forum: No registered users and 25 guests