All Lighting Questions Here!
Posted: Fri Oct 24, 2008 11:01 am
ClubCJ - The CJ Lancer Club
All Lighting Questions Here!
Page 1 of 9
Posted: Fri Oct 24, 2008 3:07 pm
nice find!
Posted: Fri Oct 24, 2008 6:37 pm
Indeed it is.... !!
some excellent information there, especially about the colour temps and use of HID's without the projector lenses
some excellent information there, especially about the colour temps and use of HID's without the projector lenses
Posted: Wed Mar 25, 2009 11:03 pm
Second that
Very useful article
It makes things a lot easier to understand
Very useful article
It makes things a lot easier to understand
Posted: Mon Apr 27, 2009 5:55 pm
if you have 2 sets of HIDs (lo beam and hi) does that mean you need 4 ballasts, or can you run them just of 2?
Posted: Mon Apr 27, 2009 5:58 pm
4 ballasts
Posted: Tue Apr 28, 2009 5:54 pm
sounds expensive, sounds like a plan! 
thanks qudans
thanks qudansPosted: Sun Oct 18, 2009 8:43 pm
angels eyes where can i get them
Posted: Sun Oct 18, 2009 8:46 pm
Our club sponsor, Automoglow.
Posted: Fri Oct 23, 2009 11:26 pm
Apart from splicing into the plug, as some have shown, did anyone find out how Mitsubishi connects the OEM footwell LED units in the car? Surely they are plug-n-play...
Can anyone shed light on how these modules are connected if you purchase them after point of sale.
Thanks
Can anyone shed light on how these modules are connected if you purchase them after point of sale.
Thanks
Posted: Sat Oct 31, 2009 1:06 pm
bump to my last question..
Posted: Mon Mar 08, 2010 12:07 am
Where should I buy Phillip's crystal vision (online)?
Is it possible to change the orange lighting that come standard in the car i.e. odometer, stereo and thermostat dials?
Thanks
Is it possible to change the orange lighting that come standard in the car i.e. odometer, stereo and thermostat dials?
Thanks
Posted: Mon Mar 08, 2010 6:16 am
You can buy Phillips globes at your local Autobarn or online at places like ebay etc
As for the interior dash lighting etc it is possible, but extremely difficult to do. There are 100s of tiny SMD LEDs that would need to be de-soldered and re-soldered, making it not only a very time consuming job, but also very risky.
As for the interior dash lighting etc it is possible, but extremely difficult to do. There are 100s of tiny SMD LEDs that would need to be de-soldered and re-soldered, making it not only a very time consuming job, but also very risky.
Posted: Mon Mar 08, 2010 8:11 am
Here is a shot I've got of the SMD LEDs (circled in red, there is 2 in the below photo )
They are tiny ones, 1mm wide 2mm long.
If they were like these ones they would be much easier (these are 2mm x 4mm)
They are tiny ones, 1mm wide 2mm long.
If they were like these ones they would be much easier (these are 2mm x 4mm)
Posted: Mon Mar 08, 2010 9:18 am
Wow that's very small (but I bet you're used to hearing that 
)
)