MMCS Sat Nav Problems
Posted: Tue May 05, 2009 2:30 pm
Hi all ... hopefully I’m posting in the correct area ... I have an 08 build Ralliart which has the MMCS Sat Nav option. It’s quite a good unit with a nice clear display (although it doesn’t have the 3D capabilities of the portable Garmin unit I use when interstate).
I do have a couple of problems with it though ... firstly the voice guidance comes from the right hand side speaker only and sounds quite muffled even at the highest volume setting. I’ve asked the dealer if it can be adjusted (as they were able to the Bluetooth volume which comes from the same speaker), but the answer after consultation with Mitsubishi was “no”.
The other issue, and the one which I would most like to resolve, is that is calculates the arrival time at the programmed destination based on an average speed of 60km/h. Being a busy businessman, I found one of the most useful features of the Garmin not so much to know how to get there, but when! You can adjust highway, secondary and suburban street speeds on the Garmin, but there appears to be nothing like this available on the MMCS. It calculates a 200km highway trip to take 3 hours and 20 minutes (200 minutes), and a 10km trip through peak hour traffic to take 10 minutes, both highly inaccurate. It also affects the guidance instructions as it will always take the shortest route regardless of the speed limits on that route. Once again the dealer claims that it can’t be adjusted.
I’m wondering if other MMCS owners have the same problems, and if they have found a fix in a hidden menu somewhere?
Cheers ....... Dan
I do have a couple of problems with it though ... firstly the voice guidance comes from the right hand side speaker only and sounds quite muffled even at the highest volume setting. I’ve asked the dealer if it can be adjusted (as they were able to the Bluetooth volume which comes from the same speaker), but the answer after consultation with Mitsubishi was “no”.
The other issue, and the one which I would most like to resolve, is that is calculates the arrival time at the programmed destination based on an average speed of 60km/h. Being a busy businessman, I found one of the most useful features of the Garmin not so much to know how to get there, but when! You can adjust highway, secondary and suburban street speeds on the Garmin, but there appears to be nothing like this available on the MMCS. It calculates a 200km highway trip to take 3 hours and 20 minutes (200 minutes), and a 10km trip through peak hour traffic to take 10 minutes, both highly inaccurate. It also affects the guidance instructions as it will always take the shortest route regardless of the speed limits on that route. Once again the dealer claims that it can’t be adjusted.
I’m wondering if other MMCS owners have the same problems, and if they have found a fix in a hidden menu somewhere?
Cheers ....... Dan