***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Dummy interior button and unplugged cable

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

JaymeF12
Lancer Newbie
Lancer Newbie
Posts: 76
Joined: Mon Mar 21, 2022 1:46 am

Dummy interior button and unplugged cable

Postby JaymeF12 » Sat Aug 20, 2022 5:41 pm

Anyone know what the dummy button next to the ASC button do? it has a wire plugged into the dummy button and behind the dummy button there is a large pin plug (24 pin?) and was wondering both could be for
Attachments
dummy button2.jpg
dummy button2.jpg (29.49 KiB) Viewed 25714 times
large plug.jpg
large plug.jpg (423.98 KiB) Viewed 25714 times

awood
Lancer VR/GT
Lancer VR/GT
Posts: 216
Joined: Tue Nov 03, 2020 4:45 pm
Location: Darwin

Re: Dummy interior button and unplugged cable

Postby awood » Sat Aug 20, 2022 6:43 pm

Pretty sure the smaller plug is for remote boot release switch , which you can buy a switch online to plug and play.
Big plug , God knows.

JaymeF12
Lancer Newbie
Lancer Newbie
Posts: 76
Joined: Mon Mar 21, 2022 1:46 am

Re: Dummy interior button and unplugged cable

Postby JaymeF12 » Sat Aug 20, 2022 10:32 pm

awood wrote:Pretty sure the smaller plug is for remote boot release switch , which you can buy a switch online to plug and play.
Big plug , God knows.


ahh but i have a like boot lever at the bottom of the seat so why have two?

awood
Lancer VR/GT
Lancer VR/GT
Posts: 216
Joined: Tue Nov 03, 2020 4:45 pm
Location: Darwin

Re: Dummy interior button and unplugged cable

Postby awood » Sun Aug 21, 2022 7:07 am

JaymeF12 wrote:
awood wrote:Pretty sure the smaller plug is for remote boot release switch , which you can buy a switch online to plug and play.
Big plug , God knows.


ahh but i have a like boot lever at the bottom of the seat so why have two?


Because , cool. :D

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: Dummy interior button and unplugged cable

Postby Lancer1993 » Sun Aug 21, 2022 2:20 pm

I'd do this if you could remove the floor one without leaving a hole in the carpet.
Image
My rides CJ VRX - CC coupe

User avatar
adamhumphrey
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 481
Joined: Fri Jan 01, 2016 11:31 am
Location: Rutherford NSW, Australia

Re: Dummy interior button and unplugged cable

Postby adamhumphrey » Sun Aug 21, 2022 7:04 pm

Image
MY11 Evo X MR (2011-Current)
MY20 Asx GSR (2023-Current)

MY11 Peugoet 207 XT HDi (2020-Mar 2023)
MY09 Lancer Sportback VRX (2015-2019) - Sold Nov 2019
Owner Operator: - Adam's Attention to Detail. Mobile Detailing and Automotive Installations.
https://www.facebook.com/AdamsAttentionToDetail/


User avatar
adamhumphrey
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 481
Joined: Fri Jan 01, 2016 11:31 am
Location: Rutherford NSW, Australia

Re: Dummy interior button and unplugged cable

Postby adamhumphrey » Mon Aug 22, 2022 8:12 am

I have HID's in my car and the adjustment is auto. I think it applied to some ralliart models. You also need the levelling motors within the headlights.
Image
MY11 Evo X MR (2011-Current)
MY20 Asx GSR (2023-Current)

MY11 Peugoet 207 XT HDi (2020-Mar 2023)
MY09 Lancer Sportback VRX (2015-2019) - Sold Nov 2019
Owner Operator: - Adam's Attention to Detail. Mobile Detailing and Automotive Installations.
https://www.facebook.com/AdamsAttentionToDetail/

User avatar
adamhumphrey
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 481
Joined: Fri Jan 01, 2016 11:31 am
Location: Rutherford NSW, Australia

Re: Dummy interior button and unplugged cable

Postby adamhumphrey » Mon Aug 22, 2022 8:20 am

http://clubcj.net/viewtopic.php?t=18409&start=30
You also have to have the wiring in the plug at the headlight also. This thread talks about it
Image
MY11 Evo X MR (2011-Current)
MY20 Asx GSR (2023-Current)

MY11 Peugoet 207 XT HDi (2020-Mar 2023)
MY09 Lancer Sportback VRX (2015-2019) - Sold Nov 2019
Owner Operator: - Adam's Attention to Detail. Mobile Detailing and Automotive Installations.
https://www.facebook.com/AdamsAttentionToDetail/

JaymeF12
Lancer Newbie
Lancer Newbie
Posts: 76
Joined: Mon Mar 21, 2022 1:46 am

Re: Dummy interior button and unplugged cable

Postby JaymeF12 » Mon Aug 22, 2022 10:35 pm

adamhumphrey wrote:http://clubcj.net/viewtopic.php?t=18409&start=30
You also have to have the wiring in the plug at the headlight also. This thread talks about it

I dont think my headlights have that, i just had a quick look and it doesnt look like there is any extra wiring besides the wires for bulbs. Also behind the front bumper, below the hood latch there was this connector and was wondering what this is for?
Attachments
FrBuPlug2.jpg
FrBuPlug2.jpg (286.39 KiB) Viewed 25590 times

User avatar
adamhumphrey
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 481
Joined: Fri Jan 01, 2016 11:31 am
Location: Rutherford NSW, Australia

Re: Dummy interior button and unplugged cable

Postby adamhumphrey » Tue Aug 23, 2022 8:43 am

Outside temp sensor I think. Unless its the sensor for bonnet open/close
Image
MY11 Evo X MR (2011-Current)
MY20 Asx GSR (2023-Current)

MY11 Peugoet 207 XT HDi (2020-Mar 2023)
MY09 Lancer Sportback VRX (2015-2019) - Sold Nov 2019
Owner Operator: - Adam's Attention to Detail. Mobile Detailing and Automotive Installations.
https://www.facebook.com/AdamsAttentionToDetail/

JaymeF12
Lancer Newbie
Lancer Newbie
Posts: 76
Joined: Mon Mar 21, 2022 1:46 am

Re: Dummy interior button and unplugged cable

Postby JaymeF12 » Sat Aug 27, 2022 2:51 pm

adamhumphrey wrote:Outside temp sensor I think. Unless its the sensor for bonnet open/close


Would this be for the fog lights actually? because i see the hood latch connector right by the hood release


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 31 guests