seat heater wiring and switch

ofey · Postby **ofey** » Sun Sep 18, 2011 10:49 am

Another thing I've also figure out today playing with the wiring harness I got from the wreckers, The plug head which we need to feed into the seat heater under the seat is the same type and size as that used for the Rockford Forsgate Sub.

Request
So my next request is if any of you without a Rockford and won't be putting one in, could you snip off the plug head which is hanging out in the boot of your car and send it to me please? I already have one from the wiring harness set here. Need another.
Would make things much neater.

Postby **aspir3** » Sun Sep 18, 2011 11:47 am

That is good info Ofey. I was wondering if we could get that wiring loom plug from.

What models will have the Rockford plug not being used?

ofey · Postby **ofey** » Sun Sep 18, 2011 11:52 am

All Lancers. I've seen it in an ES Lancer here in Melbourne. The plug is just hanging there.

So anyone here without any desire of installing a RF Subwoofer, please snip the head off and send it to me please??

Meaty · Postby **Meaty** » Sun Sep 18, 2011 12:22 pm

before you get people to snip off the wires, are we sure there is no current running through them? dont want to bow a headset fuse or anything......

Postby **aspir3** » Sun Sep 18, 2011 12:25 pm

Yes cut each wire 1 at a time and then put some insulation tape on the end.

Also leave at least 50mm length of wires on the plug for us to connect to.

If there is any one in SA willing to give me theirs it would be appreciated too.

ofey · Postby **ofey** » Sun Sep 18, 2011 12:36 pm

Meaty wrote:before you get people to snip off the wires, are we sure there is no current running through them? dont want to bow a headset fuse or anything......

Nope certainly not. The end of that wire is plugged into a blank since you don't have an amplifier.

dubdocker · Postby **dubdocker** » Sun Sep 18, 2011 5:49 pm

chris851 wrote:Hey Tory, not sure if this can help but has bits on the seats and wiring. really detailed. http://torrents.thepiratebay.org/420133 ... PB.torrent

I've uploaded the circuit diagrams from this onto CCJ Images.

nespi13 · Postby **nespi13** » Sun Feb 10, 2013 2:35 pm

i have a evo x mr 2012 and i dont have heated seats. i want to install them, i ordered the switch and know where it goes im just trying to find which harnesses i need to make them work thanks

4B11LA · Postby **4B11LA** » Sun May 04, 2014 9:08 am

I have this switch and plugs and leather seats all surplus to my needs

belle_tb_ES · Postby **belle_tb_ES** » Sun May 04, 2014 9:56 am

My 08 ES doesn't even have a spot in the fuse box for it. No wiring etc

4B11LA · Postby **4B11LA** » Sat May 24, 2014 8:32 am

i still have the switch, harness from switch to vehicle harness and connectors to both seats with the earths being unpicked from earth connector for easy install sell complete only, just trying to get pic up
or pm me and i can text pic

whitenight · Postby **whitenight** » Sat May 24, 2014 12:12 pm

age69er43 · Postby **age69er43** » Tue Jan 26, 2016 12:14 am

Anyone had any luck hooking it up

just wondering if you had trouble connecting it up?
I've put a relay in and there is a fuse already there, connected the connections under the seats put the wire loom in under the cup holder to the switch and nothing. Relay is warm, the switch lights up with headlights on but that's it, could anyone help me? Cheers really appreciate it[img]Image%20Location[/img]

seat heater wiring and switch

HELP MEGA BUMP !!!!!!!!!!!!!!!!!!!

Who is online