Headlight Bulb question

[Metalstrix]

Hey guys

As some of you know, my angel lights are on my car ^^. But there was a catch to todays installation. There's no headlight bulb in the headlights! So I have to go buy them. I do know that I have to by H7 light bulbs as mwang said in his post. The problem is, I don't know what type of light I'm buying.

Am I buying the bulb by itself? Am I getting a plug in?



Should I buy this?

http://www.jaycar.com.au/productView.asp?ID=SL3413

[MRWOLF]

I'm pretty they are H7 maybe H7B
There are two types (obviously) and you need the one with the brown plug underneath the globe (hope that makes sense)

[Metalstrix]

Well with the link below the picture. Is that the right one? i'm not very savy on this stuff

[Ayrton]

if you want a hid bulb..you will need to install ballasts..if you are going straight from oem lights..you will just need to buy a h7 halogen bulb from supercheap, etc. you can get pretty good halogens (around 4300-5000k)

[SEB15]

From the pic looks like you need a HB4 bulb! i recomand to get PHILIPS 100%+
The link what you put it up is with HID bulbs so you will need the balast to run them! But if you run HID's without a projector you can get defected by police or called --> http://www.youtube.com/watch?v=h2nJfH_RXnk

[Metalstrix]

Hey guys

Thanks for your help. I got some bulbs coming in. Case closed

[Tarquin]

Any lighting questions should be checked in the Lighting section first - All your answers would be there - LOL

If you tried the search function on the forum, or looked down the modification list you would see a section called 'Lighting' - One of the sticky's is there is called the Lancer Bulb list ! << Click Link

Front of car:
Front turn signal light: 21watts bulb: WY21W
Head light, high beam: 60watts bulb: 9005 HB3
Head light, low beam: (halogen bulb) 51watts bulb: 9006 HB4
front foglight: 55watts bulb: H11
Front side marker and parking light: 5watts bulb: WY5W 194
Side turn signal light: 5watts bulb: W5W 195

[mickyoz]

As this is an aftermarket H/L it would most likely be H7 or H1.

What did you end up getting for it Thomas?

Also that pic you have showing is a dummy plug that goes into a dummy socket from the old headlight you have, halogen version. (HID factory headlights use that plug for the leveling motor)

[Metalstrix]

As this is an aftermarket H/L it would most likely be H7 or H1. What did you end up getting for it Thomas? Also that pic you have showing is a dummy plug that goes into a dummy socket from the old headlight you have, halogen version. (HID factory headlights use that plug for the leveling motor)

Hi Mick

I actually ordered some H7s. But I've paused my order at the moment because I haven't got confirmation that they are the right ones. I'm still doing a bit of research on them.

It's for http://www.ebay.com.au/itm/120938858887 ... 3867wt_914

It would be great if anyone can confirm that H7 will be the right bulb