***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Wanted small piece of front bumper

Post Things You Are Wanting To Buy Or Trade.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Wanted small piece of front bumper

Postby Chubb » Fri Jul 02, 2010 8:07 pm

Hey as per subject I wondering if anyone has a small piece of front bumper.

I want to block the holes in my bumper for the stock number plate mount so I guess 2 pieces 30mm x 30mm would be plenty.

Cheers
User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Fri Jul 02, 2010 8:16 pm

Take bits from under the bumper? :P
User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Fri Jul 02, 2010 8:28 pm

Dire wrote:Take bits from under the bumper? :P


Awesome idea, or hire a car for a day and do that :mrgreen:
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster
User avatar
zedd82
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Tue May 12, 2009 11:13 am
Location: Brisbane, QLD, Australia

Postby zedd82 » Fri Jul 02, 2010 10:21 pm

Why not buy one of these http://www.carbontrix.com/store/index.php?main_page=product_info&cPath=1_7&products_id=152, not the cheapest but would look good...
Club CJ's fastest and most powerful Ralliart 349.8kw/ 469hp atw 12.068s 187km/h
User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Re: Wanted small piece of front bumper

Postby Blakey » Fri Jul 02, 2010 11:16 pm

Chubb wrote:Hey as per subject I wondering if anyone has a small piece of front bumper.

I want to block the holes in my bumper for the stock number plate mount so I guess 2 pieces 30mm x 30mm would be plenty.

Cheers


i think i have a bit of my rear bumper fairly flat i think might be curved, its from my exhaust cutout if i find it ill let you know, ill look on saturday for it
User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Sat Jul 03, 2010 9:16 am

Thanks Blake that would be great, as you know it only has to be a small piece for both cutouts then the leftover to fill the screm holes. :D
User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Sat Jul 03, 2010 2:25 pm

hey Nathan mate i couldn't find is sorry. it must have been thrown out.

if you go to i think its auto barn they sell small sheets of ABS plastic, might be good to use. or use some sikaflex to fill it then smooth it out.
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM
User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Sat Jul 03, 2010 6:23 pm

No worries Mate, yeah what you suggested was my backup plan :P. Oh well I will see how I go, should of posted this about 2 months ago before all the accidents that happened :).
Post Reply

Return to “Buying & Trading”

Who is online

Users browsing this forum: No registered users and 16 guests